Summary of Contents for AVANT A36518
- Page 1 English Hydraulic trailer hitch 2021 1 Operator's Manual for Attachment Hydraulic trailer hitch Product number A36518 www.avanttecno.com A446089 2021 1 EN 2017-...
- Page 2 Hydraulic trailer hitch 2021 1...
-
Page 3: Table Of Contents
Hydraulic trailer hitch 2021 1 CONTENTS 1. FOREWORD ............................4 Warning symbols used in this manual ........................... 5 2. DESIGNED PURPOSE OF USE......................6 3. SAFETY INSTRUCTIONS FOR USING THE ATTACHMENT ............7 Personal protective equipment ..........................8 Safe shutdown procedure ............................8 4. -
Page 4: Foreword
If you sell or transfer the equipment, be sure to hand over this manual to the new owner. If the manual is lost or damaged, you can request a new one from your Avant dealer or from the manufacturer. -
Page 5: Warning Symbols Used In This Manual
5 (18) Warning symbols used in this manual The following warning symbols are used throughout this manual. They indicate factors that must be taken into account to reduce the risk of personal injury or damage to property: WARNING SAFETY ALERT SYMBOL This symbol means: “Warning, be alert! Your safety is involved!”... -
Page 6: Designed Purpose Of Use
6 (18) 2. Designed purpose of use The AVANT Hydraulic trailer hitch is an attachment that is intended to be used with AVANT compact loaders that are shown in Table 1. The attachment is intended for moving different type of trailers. -
Page 7: Safety Instructions For Using The Attachment
7 (18) 3. Safety instructions for using the attachment Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly powerful and improper or careless use or maintenance may cause serious personal injury or property damage. -
Page 8: Personal Protective Equipment
8 (18) Make sure that the loader is equipped with necessary safety components, and that they are in working condition. Seat belt must be used. If there are specific hazards related to the operating area, use appropriate safety equipment. ... -
Page 9: Technical Specifications
1500 kg Max vertical load: 700 kg Compatible AVANT loaders: See Table 1, Designed purpose of use 4.1 Safety labels and main components of the attachment Listed below are the labels and markings on the attachment. They must be visible and readable on the equipment. - Page 10 10 (18) Table 3 - Decal locations and warning messages Decal Warning message 1 A46771 Misuse hazard - Read instructions before use. 2 A46803 Crushing hazard, moving components. Keep clear of moving components. 3 A433818 Attachment identification plate Table 4 - Hydraulic trailer hitch - Main components Towing hitch Frame Hydraulic hoses and couplings...
-
Page 11: Assembling The Attachment
11 (18) 5. Assembling the attachment Attaching the attachment on the rear of the loader is quick and easy, but it must be done carefully. The attachment is mounted to the rear of the loader by using M12 bolts (4 pcs) and thread locking compound. If the attachment is not mounted properly, it may detach from the loader and cause a hazardous situation. -
Page 12: Operating The Attachment
If your loader is not listed in Table 1 on page , ask your Avant dealer before using this attachment. Avoid running over persons - Check surroundings before driving. Always look in the direction the loader is moving. -
Page 13: Use
13 (18) 6.3 Use Before starting to work: Read all safety instructions. Using the Hydraulic trailer hitch: When transporting load with the trailer hitch, make sure that the load is well balanced and stays firmly. The load must be transported calmly, and the swinging of the load must be avoided. Always drive slowly while operating the Hydraulic trailer hitch. -
Page 14: Maintenance And Service
Finding any fault means that the hydraulic hose or component must be replaced and the equipment must not be used until it is repaired. Spare parts are available from your nearest AVANT retailer or authorised service point. Leave the repair work to professional service technicians, if you don’t have adequate knowledge and... -
Page 15: Cleaning The Attachment
15 (18) 7.2 Cleaning the attachment Clean the attachment regularly to prevent accumulation of dirt which is more difficult to remove. A pressure washer and mild detergent can be used for cleaning. Do not use strong solvents, and do not spray directly at the hydraulic components, or at the labels on the attachment. -
Page 16: Warranty Terms
16 (18) 8. Warranty terms Avant Tecno Oy grants a warranty of one year (12 months) from the date of purchase for the attachment it manufactures. The warranty covers repair costs as follows: Work costs are covered, if the repair is not performed at the factory. - Page 17 SFS-EN ISO 12100, SFS-EN ISO 4413 Mallit / Modeller / Models Avant Hydraulitoiminen vetokoukku; Avant-kuormaajan työlaite Hydraulisk dragkrok; arbetsredskap för Avant lastare A36518 Hydraulic trailer hitch; attachment for Avant loaders 26.2.2021 Ylöjärvi, Finland Risto Käkelä, Toimitusjohtaja / Verkställande direktör / Managing Director...
Need help?
Do you have a question about the A36518 and is the answer not in the manual?
Questions and answers