Id Setting; Talk Function - Lab-T MCS-2.4G User Manual

Table of Contents

Advertisement

VATOO INC
In Group mode, group can be set with UP/DOWN button in the range of 0 ~ 39.

1.4. ID Setting

MCS-2.4G intercom has ID setting function to communicate with each other. Each intercom has
to have an unique Identification number in the same group and Master's ID must be set "00" .
How to set
After turned on, phone is in volume control mode.
To change volume mode into group mode, press Mode Button Long
Press Function button to move ID change mode as below.
In ID change mode, ID can be set with UP/DOWN button in the range of 0 ~ 99.

1.5. TALK Function

MCS-2.4G intercom serves TALK function to let users start to talk with others. In case of Master, the
default talk mode in ON, and in case of Slaves the default talk mode is in inactive state. Therefore
Master can start to talk after power is turned on, Slaves are required to press Mode button then
Talk function is activated. Talk function is available in 6 phones including Master at the same time.
While 5 slaves are using Talk, if another slave tries to talk by pressing mode button, Master
release one of 5 slaves that accessed first and allows the latest one to use Talk. In this way 6
Title
MCS-2.4G user Manual
Version
V1.0
Release
2015.10.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MCS-2.4G and is the answer not in the manual?

Questions and answers

Table of Contents