Mvision MVP195 Quick Start Manual

MOOD:MVISION
WELCOME TO MOOD!
This box contains everything you need to get started with digital signage.
CONTENTS
• Mood MVP195 x 1
• 5V Power Adapter x 1
• MVP195 Remote x 1
MVP195 AT A GLANCE
POWER USB x 3
BUTTON
OPTICAL
AUDIO IN
AUDIO
AUDIO OUT HDMI OUT
USB THUMB DRIVE
*Actual USB device is subject to change
moodmedia.com
• AAA Battery x 2
• HDMI Cable x 1
• Network Cable x 1
SETTING UP YOUR MVP195
When connecting your MVP195, please follow these steps in the order
MICRO SD CARD
listed below:
SLOT
1. Insert the USB Thumb Drive
Your MVP195 should already have a USB Thumb Drive Inserted into
a USB port when you remove it from the box. If it does not, insert
OTG
the provided USB Thumb Drive into any of the USB 2.0 ports. The
USB Thumb Drive contains files that your player needs to operate.
Before attaching any cables, confirm that the USB Thumb Drive is
inserted into the player.
RJ-45
2. Connect the HDMI Cable
Connect one end of the included HDMI cable to the MVP195 and the
other end to your TV.
DC POWER
3. Connect the Ethernet or WiFi
If you are using a wired Ethernet connection, plug the Ehternet
cable into the Ethernet jack. If you are using WiFi, attach the
included WiFi Antenna to the player. For more information on how to
connect your device to WiFi, refer to the MVP Settings User Guide
4. Connect the Power
Connect the 5V power adapter to the MVP195 and plug the other
end into a wall outlet or power strip.
5. Turn on your TV and Select the Input
Turn on your TV and select the correct HDMI input. You should see
your content begin to play on the screen shortly.
MVP195 Quickstart Guide
• WiFi Antenna x 1
• USB Thumb Drive x 1
• Velcro Square x 1