Download Print this page

Trust UN110W User Manual

Wireless notebook connection kit

Advertisement

Quick Links

TRUST UN110W WIRELESS NOTEBOOK CONNECTION KIT
Method when using for the first time
1.
Installing the hardware
2.
3.
4.
5.
6.
7.
1
Introduction
This instruction manual is for users of the TRUST UN110W WIRELESS
NOTEBOOK CONNECTION KIT. This kit allows you to easily make a wireless
network between your notebook and your desktop computer.
2
Safety
Carefully read the following instructions before use.
-
The TRUST UN110W WIRELESS NOTEBOOK CONNECTION KIT does not
require any special maintenance. Use a slightly damp, soft cloth to clean the
casing.
-
Do not use aggressive substances, such as petrol or white spirit, to clean the
device. These may harm the material.
-
Do not submerge the device in liquid. This may be dangerous and will damage
the device. Do not use this device near water.
-
Make sure nothing is placed on the cable. Do not use this device in an area
where the cable can become worn or damaged as a result of people walking
over it.
-
Do not repair this device yourself. If you open this device, you may touch live
components. This device must only be repaired by qualified personnel.
-
Under the following circumstances, have the device repaired by qualified
personnel:
* The cable or plug is damaged or worn.
* The device has come into contact with rain, water or another liquid.
Chapter
(3.1)
!
(3.2)
(3.3)
(4)
(5)
(6)
(7)
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the UN110W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Trust UN110W

  • Page 1: Table Of Contents

    General network settings Example settings for a wireless network Introduction This instruction manual is for users of the TRUST UN110W WIRELESS NOTEBOOK CONNECTION KIT. This kit allows you to easily make a wireless network between your notebook and your desktop computer.
  • Page 2: Uninstalling Old Drivers And Devices (3.1)

    In that case, remove all the programs which appear twice. Restart the computer. Installing the UN110W Wireless Notebook Connection Follow the instructions below to install the UN110W Wireless Notebook Connection Kit. 3.2.1 Wireless PC-Card Note: The Wireless PC-Card is ‘hot-swappable’.
  • Page 3: U K

    ROM drive. Check which letter is used by your computer to indicate your CD-ROM drive. The driver for the Trust UN110W Wireless Network will be found. Follow the instructions to install the driver. Restart your system after the driver has been installed.
  • Page 4: Checking After The Installation

    ‘Start – Settings – Control Panel’. Double-click on the ‘System’ icon and select the ‘Device Manager’ tab. - Network adapters – Trust UN110W Wireless Network (on the system with the USB) - Network adapters – Trust PN110W Wireless Network (on the system with the PC- Card) Start –...
  • Page 5 TRUST UN110W WIRELESS NOTEBOOK CONNECTION KIT frequency range. This differs per region. For Europe, this is ‘ETSI’ (see figure 2). You can alter your personal settings in the ‘Configuration’ tab (see figure 3). - Network type: Select ‘802.11 AdHoc’ for a direct connection between the PC-Card and the Wireless USB adapter.
  • Page 6 Windows XP Windows XP has full wireless network support. It is, therefore, not necessary to install the Trust Wireless Utility. Follow the instructions below if you wish to use the Trust Utility. After installing the Wireless PC-Card and/or USB adapter in Windows XP, a new icon will appear in the Windows taskbar.
  • Page 7: General Network Settings

    TRUST UN110W WIRELESS NOTEBOOK CONNECTION KIT Click on ‘Start – Control Panel’ and switch to ‘Classic View’. Double-click on ‘Administrative Tools’. Double-click on ‘Services’. Scroll down through the list and double-click on ‘Wireless Zero Configuration’. Set ‘Startup Type’ to ‘Disabled’.
  • Page 8 TRUST UN110W WIRELESS NOTEBOOK CONNECTION KIT Click on the ‘Network Neighborhood’ icon on the desktop to access a shared hard disk or directory. A drive letter can be assigned to a share so that it can be accessed directly from every application. You can indicate this letter in the share’s properties.
  • Page 9 TRUST UN110W WIRELESS NOTEBOOK CONNECTION KIT Windows 2000 6.6.1 Network identification Follow the instructions below to set or change your computer name and/or workgroup name. Open the ‘Control Panel’ (Start – Settings – Control Panel). Double-click on the ‘Network and Dial-up Connections’ icon.
  • Page 10 TRUST UN110W WIRELESS NOTEBOOK CONNECTION KIT Windows XP 6.7.1 Adding and removing a protocol A protocol is a language your computer uses to communicate with other computers. See Windows Help for more information. Follow the instructions below to add or remove a protocol.
  • Page 11: Example Settings For A Wireless Network

    If the TCP/IP protocol has not been installed, click on ‘Add’, double-click on ‘Protocol’, select ‘Microsoft’, click on ‘TCP/IP’ in the list and then click on ‘OK’. Select the ‘TCP/IP -> Trust Wireless Network’ protocol from the list and click on ‘Properties’.
  • Page 12 TRUST UN110W WIRELESS NOTEBOOK CONNECTION KIT Click on the ‘IP Address’ tab and select ‘Specify an IP address’. For ‘IP Address’, input the IP number 192.168.0.10 for the first PC in the wireless network. For ‘IP Address’ for the second PC and any other PC’s, input an ascending number (192.168.0.11, etc.).
  • Page 13 If the computer cannot make a connection with the server or another computer, first check the following points. Have the drivers for the Trust CN105W Wireless Network PC-Card been installed correctly? The drivers cannot be installed if the card is faulty or has not been inserted into the PCMCIA slot correctly.
  • Page 14 You will be automatically informed of developments to your product and other Trust products. If you still have problems after trying these solutions, please contact one of the Trust Customer Care Centers. Please have the following information available. •...