Gainsborough H537 Instructions For Use

S/4 LED Copper Firefly Lights
H537
v001: 15/01/21
Please read and retain these instructions for future reference
Batteries: 3 x AA (not included)
Cord length: 30cm
Bulb spacing: 10cm
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Operation
1. Carefully take out the LED light chain from the box.
2. Open the battery compartment and insert 3x AA batteries (not included).
Warning: For indoor use only
3. Close the battery compartment and switch on.
BATTERIES
•
Keep batteries away from children and pets.
•
Do not mix used and new batteries.
•
Install batteries in accordance with its polarity symbols.
•
Remove the batteries if left for long periods.
•
Never dispose of batteries in a fire.
•
Keep batteries away from children and pets.
•
Battery disposal, spent or expired batteries must be properly disposed of and recycled in compliance
with local regulations. For detailed information, contact your local authority.
• Follow the battery manufacturer's safety, usage, and disposal instructions.
Dimensions
5.2m long (approx.)
•
SET 4
•
EACH ONE HAS 50 WARM WHITE LEDS WITH 10CM IN
BETWEEN EACH LED (LEDs not replaceable)
•
TOTAL LENGTH 5.2M
•
BATTERY OPERATED, POWERED BY 3XAA BATTERIES (NOT
INCLUDED)
•
THE COPPER WIRE EASILY BENDS AND TWISTS MAKE
THEM HIGHLY VERSATILE, WRAP AROUND MIRRORS,
FIREPLACES, PICTURE OR IN FLOWER ARRANGEMENTS
AND VASES
•
THEY GIVE OFF A MAGICAL GLOW ALMOST MIMICKING
FIREFLIES