Hyundai ATC40J9AN User Manual page 108

WARNING
- Backing Up & Using Camera
• Never rely solely on the rear view cam-
era when backing up. Prior to entering
your vehicle always do a visual check of
the area behind your vehicle, and before
backing up be aware of your surroundings
and supplement the rear view camera by
looking over your shoulders and checking
your rear view mirrors. Due to the diffi-
culty of ensuring that the area behind you
remains clear, always back up slowly and
stop immediately if you even suspect that
a person, and especially a child, might be
behind you.
Information
i
• A separate chipset is used for the camera
screen while booting up, so it may be different
after booting up.
7-2 I Other Features
Steering-linked camera
This device is connected to a rear
detection camera to see behind the car
for safe reversing.
The Rear View Camera turns on
automatically if you shift the gear to R
when the power is on or the engine has
started.
While the device boots up, shift the gear to
"R" to activate the rear detection cameras.
Shift the gear to another position to
deactivate the rear detection camera.
NOTICE
• A wide-angle lens is installed as the rear
detection camera to get a wider view, so
there may be some difference between the
actual distance and the distance that appears.
on-screen. For safety, make sure to view
the back, right, and left sides of the car for
yourself.
• The color of the parking guidelines displayed
in the picture may differ from the actual
screen.
• When booted up, blinking may occur when
you switch to a UI screen.
Name Description
About 0.5m from the rear
Red Line
bumper
About 1m from the rear
Yellow Line 1
bumper
About 3m from the rear
Yellow Line 2
bumper
Trajectory of the wheel
Yellow Line 3
on the driver's side
Trajectory of the wheel
Yellow Line 4
on the passenger side
Neutral steering trajec-
Blue Line
tory
As you reverse your car and monitor the
area behind your car, the steering-linked
driving trajectory and the neutral driving
trajectory are both displayed.