OPERATION
Connecting to Power
This product can be connected to a power outlet using the included AC.
If a suitable power outlet is not available, the trap can be powered using x4 "D" batteries.
•
Remove the battery compartment cover.
•
Insert x4 "D" batteries into the battery compartment (pay close attention to the
orientation of the polarity symbols).
Note: When the batteries are low and need to be replaced, the indicator will flash
RED and GREEN.
Remote LED
•
Connect the remote LED cord to the extension port on the trap.
•
Mount the LED in a visible location.
•
The LED will flash BLUE when a rodent has been exterminated.
LED
Extension port