Related Manuals for Daitsu CSAD UiAWP 100
Summary of Contents for Daitsu CSAD UiAWP 100
- Page 1 USER MANUAL SERIE CSAD UiAWP 100/200/300 (PS) EDITION 04/09 MODULAR CHILLER INVERTER CSAD UiAWP 100 (PS) CSAD UiAWP 200 (PS) CSAD UiAWP 300 (PS)
- Page 2 User Manual_________________________________________...
- Page 3 User Manual_________________________________________ ● This manual gives detailed description of the precautions that should be brought to your attention during operation. ● In order to ensure correct service of the wire controller please read this manual carefully before using the unit. ●...
-
Page 4: Table Of Contents
User Manual_________________________________________ Contents 1 Safety Precautions ................1 2 Overview of Wired Controller ............3 3 Menu Operations................5 4 Installation Manual .................25 5 Failure Information and Code............37 6 Attached Table About Modbus ............41... -
Page 5: Safety Precautions
User Manual_________________________________________ 1 Safety Precautions The product and Operation and Installation Instructions record the following content, including the operation method, how to prevent harms to others and property losses, and how to use the product correctly and safely. Read the text after understanding the content (identification and marker maps) below carefully, and observe the precautions below. - Page 6 User Manual_________________________________________ 1 Safety Precautions Icon Name It indicates "prohibited". The specific content of prohibition is provided using graphics or text in the icon or nearby. It indicates "mandatory". The specific mandatory content is provided using graphics or text in the icon or nearby. Entrust your distributor or a professional to install the product.
-
Page 7: Overview Of Wired Controller
User Manual_________________________________________ 2 Overview of Wired Controller Enter the menu structure from Turn on or off the the home page space operation mode Navigate the cursor on the display/navigate in the menu structure/ adjust the settings Come back to Long press for the up level unlocking /locking the controller... - Page 8 User Manual_________________________________________ 2 Overview of Wired Controller 10:35 A 20/11/2017 Set temperature Tw Units operating ONLINE COOL Tws Heating mode UNITES Number of parallel units Cooling mode Current temperature Tw ERROR Current ERROR Alarm Current temperature T5 icon Timer WEEKLY WEEKLY TIMER ON TIMER ON icon...
-
Page 9: Menu Operations
User Manual_________________________________________ 3 Menu Operations 3.3 Setting Mode In Unlock mode, press the "MENU" button to enter the menu setting interface, press 3.1 Unlocking/Locking Operation the "▼" and "▲" buttons to select "MODE" and set a mode, and press the "OK" button When the wired controller is locked, press and as shown in the above figure to access the hold the "UNLOCK"... - Page 10 User Manual_________________________________________ When the current mode button is selected USER MENU (blinking), press "◄" and "►" to set a mode or temperature, and then press "▼" TEMPERATURE COMPENSATION TEMPERATURE COPENSATION and "▲" to adjust the mode and set temperature value. After setting, press the HEATER CONTROL(DISABLE) "OK"...
- Page 11 User Manual_________________________________________ QUERY TEMP QUERY TOTAL IN-LET OUT-LET SATAT QUERY OUT-LET AMBLENT WATER WATER WATER TEMP TEMP TEMP TEMP TMEP QUERY 25℃ 25℃ 25℃ 25℃ BACK ◆ ◆ State query: Setting the timer: Press "▼" and "▲" buttons to select Press "▼"...
- Page 12 User Manual_________________________________________ When the cursor stays at "ACT", press "▲" and "▼" buttons to select the timer Timer1 or DAILY TIMER Timer2 and press the”ON/OFF” button to T.ON T.OFF MODE TEMP enable or disable daily timer function. Press the "◄" and "►" buttons to select the 10:00A 12:00A HEAT...
- Page 13 User Manual_________________________________________ The operation is the same as the operation of ◆ Setting the weekly schedule: daily timer. Press the "▼" and "▲" buttons to select When the setting of ACT is ON, then press the "WEEKLY SCHEDULE" in the “TIMER” “OK”...
- Page 14 User Manual_________________________________________ Date setting operation instructions: Press the "▲" and "▼" buttons to select the Press the "◄" and "►" buttons to select date or time, and press the "OK" button to “YEAT”, “MONTH” and “DAY”, press the "▲" access the lower-layer submenu: and "▼"...
- Page 15 User Manual_________________________________________ Press the "◄" and "►" buttons to set the DOUBLE SETPOINT parameter, and press the "OK" button to save the setting and return to the previous interface,or press the "BACK" button to cancel POINT POINT POINT POINT the setting and return to the previous COOL_1 COOL_1 HEAT_1...
- Page 16 User Manual_________________________________________ TEMP COMPENSATION TEMP COMPENSATION-HEAT MODE COOL MODE SETPOINT OFFSET ENABLE COOL_1 HEAT_2 HEAT_1 HEAT MODE Press the "▲" and "▼" buttons to select the Operation instructions: COOL MODE and HEAT MODE, and press Press the "◄" and "►" buttons to select the the "OK"...
- Page 17 User Manual_________________________________________ 3.5 Setting PROJECT MENU PROJECT MENU SORRY,WRONG PASSWORD, ◆ Entering the password: PLEASE INPUT AGAIN. Select "PROJECT MENU", and press the "OK" 0 0 0 button to enter the menu. The screen prompts the user to enter the password, as shown below: The query interface as follows is displayed if PROJECT...
- Page 18 User Manual_________________________________________ ◆ Set unit air-conditioning: SET PARALIET UNIT Press "▼" and "▲" buttons to select the Ratio_ Ratio_ Tim_ "SET UNIT AIR-CONDITIONING" in the Tw_diff cool_ heat_ Cap_Adj “PROJECT MENU” interface, and press first first the "OK" button to enter the interface. The interfaca display is as follows: 2℃...
- Page 19 User Manual_________________________________________ Press the “▲” and “▼” buttons to set the ◆ Set heater: values and press “OK” button to save the Press "▼" and "▲" buttons to select the setting and return to the previous interface,or "SET HEATER" in the “PROJECT MENU” press the "BACK"...
- Page 20 User Manual_________________________________________ Tips:The value of “Tw_Heat1_OFF” is bigger than “Tw_Heat1_ON”. CONTROLLER SELECT HEAT2 function is disabled, so user can not enter the HEAT2 interface. MODBUS: ◆ Check parts Press "▼" and "▲" buttons to select the "CHECK PARTS" in the “PROJECT MENU”...
- Page 21 User Manual_________________________________________ The query interface as follows is displayed SERVICE MENU if the input is correct: PLEASE INPUT THE PASSWORD SERVISE MENU 0 0 0 STATE QUERY TEMPERATURE COPENSATION HISTORY ERROR QUERY The initial password is 9999 and cannot be changed.
- Page 22 User Manual_________________________________________ Press the "▼" and "▲" buttons to select the STATE QUERY address of module to view (the offline address is skipped automatically). Press the "OK" EXVA button to access the lower-layer submenu, or EXVB press "BACK" to go back to the previous EXVC interface.
- Page 23 User Manual_________________________________________ Press the "◄" and "►" buttons to select the STATE QUERY different page. SV2 STATE ◆ History error query HEAT1 STATE Press the "▼" and "▲" buttons to select "HISTORT ERROR QUERY" in the “SERVIE HEAT2 STATE MENU” interface, and press the "OK" button to DISCHARGE TEMP enter the interface.
- Page 24 User Manual_________________________________________ The wired contrlo can display 8 errors at QUERY most.Take the mainboard (00#) as an example to make further explanation of the submenu. SELECT THE QUERING ADDRESS After the mainboard is selected, the running state of mainboard is as shown below: HISTORY ERROR QUERY E2:COMMUNICATION ERROR Press the "▼"...
- Page 25 User Manual_________________________________________ 3.7 Setting Wired Controller Press the "▼" and "▲" buttons to select the desired option, If “YES” is selected then press Address the "OK" button to clear current address error,and return to the “HISTORY ERROR Press the "MENU" and "►" buttons for 3s at QUERY”...
- Page 26 User Manual_________________________________________ 3.8 Power Failure Memory 4) Start point of data sharing: After the power-on/off button is pressed, data can be Function shared during parameter adjustment. The "OK" button must pressed after The power supply to the system fails parameters are adjusted, and the finally unexpectedly during operation.
- Page 27 User Manual_________________________________________ 10:35 A 20/11/2017 MON 10：35A ONLINE COOL Tws UNITES SET ADDRESS ERROR WEEKLY TIMER ON TIMER ON When set address “01-15” and press “OK” button,the wired remote controller will enter The set address range is 00 to 15. the interface as follows: Press the "▲"...
- Page 28 User Manual_________________________________________ 3.11 Upper Computer Communication Function 1) The home page displays the content below during communication with the upper computer: Communication between the wired controller and the upper computer,the icon “ ” will be displayed on the home page interface.
-
Page 29: Installation Manual
User Manual_________________________________________ 4 INSTALLATION MANUAL 4.1 Safety precaution Read the safety precautions carefully before installing the unit. Stated below are important safety issues that must be obeyed. Conform there is no abnormal phenomena during test operation after complete, then hand the manual to the user. Meaning of marks: Means improper handling may lead to personal death or WARNING... - Page 30 User Manual_________________________________________ CAUTION Do not install the unit in a place vulnerable to leakage of flammable gases. Once flammable gases are leaked and left around the wire controller, fire may occure. The wiring should adapt to the wire controller current. Otherwise, electric leakage or heating may occur and result in fire.
- Page 31 User Manual_________________________________________ Name Remarks Qty. Wire controller Cross round head wood GB950-86 M4X20 (For Mounting on the Wall) mounting screw M4X25 GB823-88 Cross round head (For Mounting on the mounting screw Electrical Switch Box) Installation & Owner's Manual This accessory is used when Plastic bolt install the centralized control inside the electric cabinet...
- Page 32 User Manual_________________________________________ 4.2.3 Note to installation of wire controller: 1) This installation manual contains information about the procedure of installing Wired Remote Controller. Please refer to Indoor Unit Installation Manual for connecting between Wired Remote Controller and Indoor Unit. 2) Circuit of Wired Remote Controller is low voltage circuit. Never connect it with a standard 220V/380V circuit or put it into a same Wiring Tube with the circuit.
- Page 33 User Manual_________________________________________ 4.3.1 Structure size figure 20mm 120mm Figure A 46mm 60mm...
- Page 34 User Manual_________________________________________ 4.3.2 Wiring Main Unit control box X Y E A Wire controller Input Voltage(A/B) 8.5VAC Wiring size 0.75mm...
- Page 35 User Manual_________________________________________ 4.3.3 Back cover installation Buckling position Back cover Front cover Straight head screwdriver Screw hole installed on the wall,use three GB950-86 M4X20...
- Page 36 User Manual_________________________________________ Screw hole fixed on the wall,use one GB950-86 M4X20 Screw hole installed on 86 Electrician box, use two M4X25 GB823-88 Back cover Signal switching wires...
- Page 37 User Manual_________________________________________ 1) Use straight head screwdriver to insert into 4.3.4 Wire outlet the buckling position in the bottom of wire controller, and spin the screwdriver to take down the back cover. (Pay attention to spinning direction, otherwise will damage the back cover!) 2) Use three GB950-86 M4X20 screws to directly install the back cover on the wall.
- Page 38 User Manual_________________________________________ Wall hole and wiring hole 60mm Wiring Diameter：Φ8--Φ10 hole Putty Trap Putty Avoid the water enter into the Putty wired remote controller, use trap and putty to seal the Trap connectors of wires during Trap wiring installation.
- Page 39 User Manual_________________________________________ 4.4 Front cover installation After adjusting the front cover and then buckle the front cover; avoid clamping the communication switching wire during installation. Sensor can not be affected with damp.
- Page 40 User Manual_________________________________________ Correct install the back cover and firmly buckle the front cover and back cover, otherwise will make the front cover drop off.
-
Page 41: Failure Information And Code
User Manual_________________________________________ 5 Failure Information and Code Error Error code Content EEPROM error of main control board Power phase sequence error Communication error between main control board and wired controller Total water outlet temperature sensor error(master only) Outlet water temp sensor error 1E5 condenser tube temperature sensor T3A error 2E5 condenser tube temperature sensor T3B error Water tank temperature sensor T5 error... - Page 42 User Manual_________________________________________ Error Error code Content Coil final outlet temperature sensor Tz/7 error System high-pressure protection or discharge temperature protection System low pressure protection Coil final outlet temperature Tz/7 too high System A current protection System B current protection Inverter module error High temperature protection of system condenser Water inlet and outlet temperature difference protection Antifreeze protection in winter...
- Page 43 User Manual_________________________________________ Error Error code Content NOT insert electionic expansion valve A error NOT insert electionic expansion valve B error NOT insert electionic expansion valve C error IPM module communication error IPM module communication error Superheat insufficient PP protection occurs for 3 times in 60 minutes (power failure recovery) PP protection occurs for 3 times in 60 minutes (power failure recovery) System A DC buss voltage error (PTC) System B DC buss voltage error (PTC)
- Page 44 User Manual_________________________________________ Error Error code Content DIP switch inconsistency of multiple water pumps 88 8 3 times PL module protection low-voltage protection high-voltage protection MCE error zero-speed protection phase sequence error frequency change over 15Hz frequency phase difference 15Hz Defrosting prompt...
-
Page 45: Attached Table About Modbus
User Manual_________________________________________... - Page 46 User Manual_________________________________________...
- Page 47 User Manual_________________________________________...
- Page 48 User Manual_________________________________________ 1:Cooling mode Modset 2:Heating mode 8:OFF Outlet Cooling mode (0℃ ~20℃) water Heating mode (25℃ ~55℃) temp. set(Tws) Setpoint cool_2 (0℃ ~20℃) Second target Setpoint heat_2 (25℃ ~55℃) temp. 1:Standard Mode Silent 2:Silent Mode mode 7:Super Silent Mode...
- Page 49 User Manual_________________________________________ Anti-freezing heater 1:OFF 2:Cooling Mode N*100+240 Running Mode 3:Heating Mode 1:Standard Mode Current silent N*100+241 2:Silent Mode Mode 3:Super Silent Mode...
- Page 50 User Manual_________________________________________ N*100+244 Units:℃ N*100+245 Units:℃ Total outlet Units:℃,only host 0 machine can N*100+246 water temp. read this parameter. N*100+247 Units:℃ Error or protect N*100+272 See “Failure Information and Code” Last error or N*100+273 See “Failure Information and Code” protect...
- Page 51 User Manual_________________________________________...
- Page 52 daitsu...
Need help?
Do you have a question about the CSAD UiAWP 100 and is the answer not in the manual?
Questions and answers