Download Print this page

Bison BNP0701 Instruction Manual page 2

7 1/2' / 15' & 21' portable player bench

Advertisement

If Your Bench Is 15' In Length
1.
Attach Braces (M) to the Leg Assemblies (B) with
3/8"
X 3" Hex Bolts (N), 3/8" Lock Washers (G) and
3/8"
Hex Nuts (F). Leave hardware finger tight.
See Figure 4.
2.
Attach the 15' Aluminum Seat (A) to Leg Assemblies
(B) with 3/8"X 3" Carriage Bolts (C), 3/8" Hex Nuts
(F), 3/8"Lock Washers (G) and Bench Clamps (E).
The Aluminum Seat (A) should extend equal distance
on both sides from the outside Leg Assemblies
(B).Tighten all hardware. See Figures 2 and 4.
3.
If you want the bench to be portable attach the
Rubber Feet (I) to the Leg Assemblies (B) with 3/8"
X 1 1/2"Hex Bolts (D), 3/8" Flat Washers (J), 3/8"
Lock Washers (G), 3/8"Hex Nuts (F). See Figure 6.
4.
If you want the bench to be fixed, anchor each Leg
Assembly (B) in 2 places using the appropriate
anchors (not included) for the mounting surface.
See Figure 7.
5.
Insert Plastic Tube Plugs (H) in Leg Assemblies (B).
See Figure 2.
6.
Install seat End Caps (K) using #10 X 3/4" Sheet
Metal Screws (L). See Figure 3.
If Your Bench Is 21' In Length
1.
Attach Braces (M) to the Leg Assemblies (B) with 3/8" X 3" Hex Bolts
(N), 3/8" Lock Washers (G) and 3/8" Hex Nuts (F). Leave hardware
finger tight. See Figure 5.
2.
Attach the 21' Aluminum Seat (A) to Leg Assemblies (B) with 3/8"X 3"
Carriage Bolts (C), 3/8" Hex Nuts (F), 3/8"Lock Washers (G) and Bench
Clamps (E). The Aluminum Seat (A) should extend equal distance on both
sides from the outside Leg Assemblies (B).Tighten all hardware.
See Figures 2 and 5.
3.
If you want the bench to be portable attach the Rubber Feet (I) to the Leg
Assemblies (B) with 3/8" X 1 1/2"Hex Bolts (D), 3/8" Flat Washers (J),
3/8" Lock Washers (G), 3/8"Hex Nuts (F). See Figure 6.
4.
If you want the bench to be fixed, anchor each Leg Assembly (B) in 2
places using the appropriate anchors (not included) for the mounting
surface. See Figure 7.
5.
Insert Plastic Tube Plugs (H) in Leg Assemblies (B). See Figure 2.
6.
Install seat End Caps (K) using #10 X 3/4" Sheet Metal Screws (L).
See Figure 3.
M
Figure 4
M
N
Figure 5
2
N
F
G
F
G
Figure 6
Figure 7

Advertisement

loading

This manual is also suitable for:

Bnp1501Bnp2101