Table of Contents
Advertisement
Cleaning protocol
Warning
You must read the installation instructions, technical
instructions, and instructions for use before handling
this equipment. The instrument must be used only
for the specifi c purpose for which it is designed, and
which is described in our literature. The assembly
and connection to the mains must be carried out by
qualifi ed personnel.
Any modification of the DM without the manufacturer's written authorisation
is prohibited.
Caution
Only those accessories allowed and provided by Promotal for this DM may be
used.
General maintenance
Apart from regular cleaning, our products do not
require regular maintenance.
The mechanical parts used as blocking mechanisms
(smooth arch, notched arch, ratchet mechanisms,
etc.) do not require any specific attention. The gas
springs on tables do not require any maintenance.
Their shaft must be kept clean, must not be subject
to jolts or hard knocks, and must not be cleaned with
any corrosive products. The electric and hydraulic
jacks do not require any particular attention.
Disinfection
This Medical Device must be regularly disinfected by products which qualify as Bactericides, Virucides and
Fungicides.
Maintenance Instructions
Painted surfaces (epoxy polyester fi nish)
The use of ordinary cleaning products, eg. window cleaning products, is perfectly suitable for cleaning surfaces
fi nished in epoxy polyester. The following products are not recommended as they will damage these
surface :
– Solvants :
8
– Bases :
Petrol
High-grade alcohols :
– Aliphatics
– Acids :
– Aromatics
Ketones - esters
Tri -perchlorethylene
Under no circumstances must electrical parts
(motor, unit housing the electrical control systems,
control unit, adaptor etc.) be opened. PROMOTAL
cannot be held responsible for any damage resulting
from the instructions not being followed.
The variable height tables, chairs and trolleys are
equipped either :
– With arms fi tted with self lubricating
articulation rings.
– With telescopic bearing runners. In this
case they should be lubricated once a
year (particularly if the runners are noisy)
with ordinary grease. (See the exploded
drawings for access to the runners).
– Others :
10 % sodium
10 % ammonium
30 % nitric
30 % chlorhydric
10 % citric
Bleach
Abrasive powders
Any abrasive
Cleaning product
User's Guide
Advertisement
Table of Contents
