Power Saving; Display Data Channel (Ddc) - Acer ED320Q User Manual

POWER SAVING

The monitor will be driven into "Power Saving" mode by the control signal
from the display controller, as indicated by the LED flashes power LED.
Power Saving Mode
The power saving states will be kept until a control signal has been
detected or the keyboard or mouse is activated. The recovery time from
Active OFF state back to ON state is around 3 seconds.

DISPLAY DATA CHANNEL (DDC)

To make your installation easier, the monitor is able to Plug and Play with
your system if your system also supports DDC protocol. The DDC (Display
Data Channel) is a communication protocol through which the monitor
automatically informs the host system about its capabilities, for example,
supported resolutions and corresponding timing. The monitor supports
DDC2B standard.
State
ON
7
LED Light
Blue
Type 1: Amber
Type 2: LED flashes