Audio And Video Information - Panasonic DMP-BD60K Operating Instructions Manual

Audio and video information

About audio from audio output terminals
Before connecting, read the table below, and confirm the desired audio type and necessary settings ("BD-Video Secondary Audio", "Dolby D/Dolby
D +/Dolby TrueHD" or "DTS/DTS-HD"). (
≥The number of channels listed is the maximum possible number of output channels.
HDMI AV OUT/DIGITAL AUDIO OUT
Terminal
"Dolby D/Dolby D +/Dolby TrueHD"/
"DTS/DTS-HD"
"BD-Video Secondary Audio"
Dolby Digital/
Dolby Digital EX
Dolby Digital Plus
Dolby TrueHD
DTS Digital Surround/
DTS-ES
DTS-HD High Resolution Audio
DTS-HD Master Audio
7.1ch LPCM
AUDIO OUT
(Analog)
Terminal
"BD-Video Secondary Audio"
Dolby Digital/
Dolby Digital EX
Dolby Digital Plus
Dolby TrueHD
DTS Digital Surround/
DTS-ES
DTS-HD High Resolution Audio
DTS-HD Master Audio
7.1ch LPCM
≥Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary.
*1 When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS Digital Surround
bitstream or down-mixed 2ch PCM (e.g., TV).
*2 [BD-V]: When playing BD-Video without secondary audio or button click sound, the audio is output as the same format as if "BD-Video
Secondary Audio" was set to "Off".
*3 When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
*4 [BD-V]: When the connected equipment is supported with 7.1 channel surround, the audio output is amplified from 5.1ch or 6.1ch to 7.1ch
depending on the DTS, Inc. specifications.
*5 With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio
decoded as DTS Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
*6 [BD-V]: When "BD-Video Secondary Audio" is set to "On", Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital
Surround, however if playing BD-Video without secondary audio or button click sound, the audio is output as the original format.
Enjoying High Bit rate Audio of BD-Video
This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video.
In order to enjoy these audio formats, the following conditions are necessary. (Part shown in the shaded area of table given above)
NECESSARY CONNECTIONS
≥HDMI AV OUT terminal: (
≥7.1ch AUDIO OUT terminal [BD80]: (
NECESSARY SETTINGS (
≥Set "BD-Video Secondary Audio" to "Off".
≥HDMI AV OUT terminal: Set "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD" to "Bitstream" or "PCM" .
≥7.1ch AUDIO OUT terminal [BD80]: Set "Analog Audio Output" to "7.1ch".
≥5.1ch AUDIO OUT terminal [BD80]: Set "Analog Audio Output" to "2ch (Downmix) + 5.1ch".
≥The button click sound on the menu and audio with secondary video in picture-in-picture mode (
8
RQT9378
9)
(Coaxial
"Bitstream"
"On"
2
*
Dolby Digital/
Dolby Digital
*
5
EX* 6
Dolby Digital
DTS Digital
Surround/
*
5
DTS-ES* 6
DTS Digital
Surround
Down-mixed
5.1ch PCM
7.1ch AUDIO OUT
"On"
5.1ch*
2
[DVD-V]: 5.1ch
[BD-V]: 7.1ch*
Down-mixed
5.1ch* 2
12)
12)/5.1ch AUDIO OUT terminal [BD80]: (
9)
/Optical)
[BD80]
HDMI AV OUT
*
1
"Off" "On"
Dolby Digital/
Dolby Digital EX
Dolby Digital
Plus
5.1ch PCM*
Dolby TrueHD
DTS Digital
[DVD-V]: 5.1ch PCM
Surround/
[BD-V]: 7.1ch PCM*
DTS-ES
DTS-HD High
Resolution
Audio
7.1ch PCM*
DTS-HD Master
Audio
Down-mixed
7.1ch PCM
5.1ch PCM*
5.1ch AUDIO
[BD80]
OUT
[BD80]
"Off" "On"/"Off"
5.1ch
7.1ch
5.1ch
4
7.1ch*
4
7.1ch
[BD-V]
13)
DIGITAL AUDIO OUT
"PCM" "Bitstream"
*
3
"Off" "On"/"Off"
Dolby Digital/
5.1ch PCM Dolby Digital
EX*
7.1ch PCM Dolby Digital
2
DTS Digital
Surround/
4
DTS-ES*
DTS Digital
4
Surround
Down-mixed
7.1ch PCM
2ch PCM
2
2ch AUDIO
OUT
"On"/"Off"
2ch
22) is not output.
"PCM"
"On"/"Off"
6
Down-mixed
2ch PCM
6