Step 6 : Reprogramming The Remote Control - Panasonic DMP-BDT100 Operating Instructions Manual

Firmware updates
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature
operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following
screen is displayed.
The latest firmware is available.
Please update firmware in Setup.
To update the firmware
Press [FUNCTION MENU]
[OK] select "Setup"
select "Firmware Update"
Now"
DO NOT DISCONNECT the unit from the AC power or
perform any operation while the update takes place.
After the firmware is installed, "FINISH" will be displayed on
the unit's display. Unit will restart and the following screen
will be displayed.
The firmware was updated.
Current Installed Version
≥ If downloading on this unit fails or this unit is not connected to the
Internet, then you can download the latest firmware from the
following website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
Information")
≥ Downloading will require several minutes. It may take longer or the
Internet may not be connected depending on the connection
environment.
≥ If you do not want to check for the latest firmware version, set
"Automatic Update Check" to "Off". (
select "Other Functions"
[OK] select "Others"
[OK] select "Update
: x.xx
OK
RETURN
31, "System
31)
STEP 6 :
Reprogramming the
remote control
For other Panasonic products
Change "Remote Control Code" (
the remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
For TV or amplifier/receiver
[OK]
You can operate the TV or amplifier/receiver using the unit's
remote control.
1
For televisions
Input the code ( 40) with the number
buttons while pressing [Í TV POWER].
For amplifiers/receivers
Input the code ( 40) with the number
buttons while pressing
[RECEIVER j VOL].
e.g., 0001: [0]
2
Test by turning on the television or
adjusting the volume of the amplifier/
receiver.
≥ If your television or amplifier/receiver brand has more than one code
listed, select the one that allows correct operation.
31) on the main unit and
[0] [0] [1]
VQT2U33
15