Specifications - Panasonic DMP-BDT210 Owner's Manual

Specifications

Signal system:
Operating temperature range:
i5 oC to i35 oC (i41 oF to i95 oF)
Operating humidity range:
10 % to 80 % RH (no condensation)
Video output: 1.0 Vp-p (75 ≠)/Pin jack:1 system
Audio output:
Number of connectors :
Digital audio output:
Optical digital output (Optical terminal)
HDMI AV output:
This unit supports "HDAVI Control 5" function.
SD card slot:
USB slot:
Ethernet: 10BASE-T/100BASE-TX : 1 system
WLAN [BDT210]
Antenna:
Standard Compliance:
IEEE802.11n / IEEE802.11a / IEEE802.11g /
IEEE802.11b
Transmission system:
MISO-OFDM system, OFDM system, DSSS
system
Transfer rate (standard)*:
IEEE802.11n:
300 Mbps
IEEE802.11g / IEEE802.11a: Max. 54 Mbps
IEEE802.11b:
Access Mode:
Security:
(This unit supports WPA and WPA2 encryption.)
LASER Specification
Class I LASER Product:
Wave length: 790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
Laser power:No hazardous radiation is emitted with the
Power supply:
Power consumption:
Power consumption in standby mode:
Power consumption in quick start standby mode:
Dimensions (WkDkH) Including the projecting parts:
(Approx. 16 15/16zk7 5/16zk1 7/16z)
Mass (Weight):
Specifications are subject to change without notice.
* Transfer rates are theoretical values; however, actual communication
rate will vary according to communication environment or connected
equipment.
NTSC
2 Vrms (1 kHz, 0 dB)/Pin jack
2 channel:1 system
Type A (19 pin) : 1 system
Connector : 1 system
USB2.0 : 2 system
Tx 1, Rx 2
Tx Max. 150 Mbps, Rx Max.
Max. 11 Mbps
Infrastructure mode
WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 bit / 128 bit)
safety protection
AC 120 V, 60 Hz
Approx. 9.9 W
Approx. 0.1 W
Approx. 3.2 W
430 mmk185 mmk35 mm
Approx. 1.6 kg (3.52 lbs)
File format
File format Extension
MP3 ".MP3", ".mp3"
JPEG ".JPG", ".jpg"
".DIVX", ".divx",
".AVI", ".avi"
Subtitles text
DivX
file
[BDT210_for_Canada]
".SRT", ".srt",
".SUB", ".sub",
".TXT", ".txt"
".MKV", ".mkv"
Subtitles text
file
MKV
".SRT", ".srt",
".SSA", ".ssa",
".ASS", ".ass"
≥ With certain recording states and folder structures, the
play order may differ or playback may not be possible.
Audio information
The audio output differs depending on which terminals are
connected to the amplifier/receiver, and the settings on the
unit. ( 30, Digital Audio Output)
≥ The number of channels listed is the maximum possible
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
"Digital Audio Output"
Terminal
"Bitstream"
HDMI AV Outputs using original
OUT
audio *1
Dolby Digital/
OPTICAL
DTS Digital Surround
When "BD-Video Secondary Audio" is set to "On", the audio will be
*1
output as Dolby Digital, DTS Digital Surround or 5.1ch PCM.
[BDT110]
: The maximum possible number of Dolby sound is 5.1ch
*2
PCM.
The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on
*3
the DTS, Inc. specifications.
Reference
ID3 tags (Only titles and
the names of artists)
≥ MOTION JPEG and
Progressive JPEG is not
supported
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file
name on a PC or other
device.
≥ The video file and
subtitles text file are
inside the same folder,
and the file names are
the same except for the
file extensions.
≥ Some DivX and MKV
file may not be played
back, depending on the
video resolution and
frame rate condition.
"PCM"
BD-Video :
7.1ch PCM
*1*2*3
DVD-Video :
5.1ch PCM
Down-mixed 2ch
PCM
39
VQT3B58