Set Up - Panasonic PT-47WX54 Operating Instructions Manual

I M O
CON ENUS PERATION
LOCK (cont.)
Main and Split Blocking Message
If V-Chip is enabled and the program exceeds the rating
limit set by you, the blocking message will appear and the
audio will be muted. Enter your four-digit secret code if you
wish to continue viewing the program. After entering your
code, all locks and rating blocks are disabled until the PTV
is turned off or until all settings are off.
Note: If you enter your four-digit secret code to override rating
blocks, you must reset all rating blocks by either
reprogramming or turning the PTV off.
Main Picture
PROGRAM RATING EXCEEDED
ACCESS CODE - - - -
PIP Blocking Message
PIP function is available when V-chip feature is activated. If
the program being viewed in PIP exceeds the set rating
limit, PIP will disappear and a blocking message will
appear on screen.
Note: If the V-chip feature is activated while PIP is on, PIP will
immediately disappear. Enable PIP functions by setting
V-CHIP ratings to OFF.

SET UP

While the desired sub menu is highlighted, press VOL
select or activate feature.
IDIOMA/
LANGUE
ANTENNA
ON MUTE
CC
MODE
CC
CONVERGE.
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
IDIOMA/LANGUE - Select to change menu language
to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS
(French).
ANTENNA - To select either ANT1 or ANT2.
ON MUTE - Activates the onscreen Closed
CC
Caption feature when the MUTE button on the remote
control is pressed. To deactivate press MUTE button
again.
28
Split Picture
PROGRAM
RATING
EXCEEDED
_ _ _ _
ACCESS
CODE
PIP RATING
EXCEEDED
to
SET UP
ENGLISH
ANT 1
NO
OFF
IDIOMA/
LANGUE
ANTENNE
ON MUTE
CC
CC MODE
CONVERGE.
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
MODE - This television contains a built-in decoder
CC
CC
that displays (Closed Captioned) text across the
screen (white or colored letters on black background).
It allows the viewer to read the dialogue of a television
program or other information. The program viewed
must include Closed Captioning for the feature to work.
Activate the onscreen Closed Caption feature by
selecting one of the following modes
Note: Closed Captioning does not function when the Picture
Aspect ratio is set to zoom, To properly display Closed
Caption, choose an aspect ratio other than Zoom.
• OFF - When Closed Caption is not desired.
• C1 - For video related information to be displayed, up to
4 lines onscreen at a time. (It does not block relevant
parts of the picture). Text may be in any language.
• C2 to C4 - For other modes of video related information.
• T1 to T4 - For program guide and other information to be
displayed, when available. (Blocks a large portion of the
picture on the television screen).
Note: C1 mode is recommended for viewing Closed Caption.
CONVERGE
Note: Only use the remote control buttons while adjusting
convergence. The front control panel navigation and
Action buttons have no effect.
IDIOMA/
LANGUE
ANTENNA
CC ON MUTE
MODE
CC
CONVERGE.
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
Note: Convergence seldom needs adjusting except after
moving the PTV or to make minor adjustments.
Procedure
• Press VOL to enter converge sub-menu field.
• Press CH or CH
• CONVERGENCE ADJ. - Select to correct minor
convergence problem.
Note: After selecting, press VOL
CONVERGENCE ADJ.
• RESET TO DEFAULT - Select to set convergence
to factory default setting.
SETUP
ENGLISH
ANT 1
NO
OFF
SET UP
PRESS TO ENTER
to select:
to continue