Download Print this page

iKnopka APE6900 User Manual

Advertisement

Quick Links

Catalogue
I.
Product introduction
II.
Screen display
III. Product parameter
IV. Operation instruction
1. Power on/off
2. Number register
3. Deleting the calling number
4. Vibration time setting
5. Display time setting
6. Deleting registered numbers
7. Initialization
8. Time setting
9. Number display mode setting
10. Password setting
11. Alarm clock setting
12. Choose alarm clock ON or OFF
13. Data downloading function
V.
Attention
VI. FAQ
I. Product introduction
APE6900 is the fifth generation of the mobile receiver. It is also the first waterproof
bracelet mobile receiver. The waterproof grade is IPX7. The receiver can be used with all
SINGCALL call pagers. It also can be registered and download data through the serial
port.
Main characteristics
1. It is waterproof, and the waterproof grade is IPX7. (It can be put into 3.3ft (1.0m) deep
water, then it still can work for more than 30 minutes.)
2. It has calendar, clock and alarm clock function.
3. With fast delete function, it can delete one registered number or all registered numbers
with only one key.
4. Downloading the registration information through the serial port, makes the registration
easier.
5. It can charge in order to avoid the problem of frequent battery replacement, super
standby time (about 5 days).
6. With encryption function, avoiding the information lost by mistake operation.
User manual of APE6900

Advertisement

loading

Summary of Contents for iKnopka APE6900

  • Page 1 VI. FAQ I. Product introduction APE6900 is the fifth generation of the mobile receiver. It is also the first waterproof bracelet mobile receiver. The waterproof grade is IPX7. The receiver can be used with all SINGCALL call pagers. It also can be registered and download data through the serial port.
  • Page 2 II. Screen display Battery indicator Alarm clock indicator 12:00 Time display 00/00 Date display III. Product parameter ◆ Key number: 2 ◆ Key life: Million times ◆ Number of display: 10 scrolling numbers ◆ Screen: OLED monochrome screen ◆ Display type: a group of three-digit or five-digit number (with storage function) ◆...
  • Page 3 2) Press and hold key [FUN] until the number „001‟or „001-01‟appears. There are two kinds of number format. (Refer to step 9 to change the format) 3) Press [ENT] to change the flashing number, press [FUN] to move the cursor (each position can set from 0-9 and A-Z).
  • Page 4 5. Display time setting 1) Standby mode, press and hold key [FUN] 3 seconds till „F01‟ appears. 2) Press key [ENT] repeatedly to choose „F03‟. 3) Press and hold [FUN], till a number between 00 and 99 appears. Press [ENT] to change the flashing number, press [FUN] to change the cursor position.
  • Page 5 „00‟ means the number display mode is XXX (the default number is „00‟) „01‟ means the number display mode is XXX-XX (This does not apply to the multi-button pagers.) Press [ENT] to change the number between „00‟ and „01‟. 4) Press and hold [FUN] till „F07‟ appears. 5) Press and hold [ENT] to back to standby mode.
  • Page 6 d) Press key [FUN] for one second to stop alarming. 13. Data downloading function (F11)(Please refer to the manual of SINGCALL data download software) V. Attention 1. When the product does not use for a long time, it is better to charge every two months to avoid damaging the battery.