Panasonic TC-26LX20 Operating Instructions Manual page 19

Zoom
(While in the single picture view mode only)
Lets you select the magnification of the single picture display.
1
CH
O K
VOL VOL
CH
2
CH
O K
VOL VOL
CH
Card
Select either SD or PC when both cards are inserted in the slots.
CH
O K
VOL VOL
CH
Photo Viewer TM
Symptom
Cannot read the content of the card.
PC card cannot be ejected.
Poor picture quality.
Picture takes a long time to display.
Error messages
"Card is not inserted correctly."
"This type of image is not supported."
"This type of format is not supported."
" "
"Photo Viewer cannot support over 3000 JPEG files."
"Photo Viewer cannot support over 8192 x 8192 pixels."
"This type of card is not supported."
Press to select Zoom.
Press to select To Fit, x2 or x4.
Press to activate the setting.
Press to move the image in the picture frame.
To cancel Zoom
Press OK to view the picture in normal magnification.
Press to select Card.
Press to select SD or PC.
Troubleshooting
• Not compatible format. Must be formatted with FAT 12 or FAT
• The extension is not "JPG".
• The folders not under DCF standard.
Push the card all the way in, and eject.
If the main image cannot be read (the file is partially corrupted),
the Photo viewer
format of the image.
There are lots of images or the file size is large.
Cause and remedy
16.
TM
will read the thumbnail. Please confirm the
Insert a card.
The JPEG file is corrupted and cannot be decoded.
The card is not formatted with FAT 12 or FAT 16 or
if it is not DCF standard.
Thumbnail and main picture cannot be shown.
Over 3000 image files.
Resolution over.
Incompatible card is inserted.
TM
Photo Viewer
19