Canon Digital IXUS 60 Advance User Manual page 100

Subject in recorded image is too bright, or
image flashes white.
Subject is too close,
making the flash too
strong.
The subject is
overexposed because
the surroundings are too
dark.
Too much light is shining
directly into the camera,
or is being reflected off
the subject.
Flash is set to on.
Image contains noise.
ISO speed is too high.
White dots appear on the image.
Light from the flash has
reflected off dust
particles or insects in the
air. This is particularly
noticeable when
shooting using the wide
angle.
98
Shoot within correct shooting
distance of the subject when using
the built-in flash
Set the exposure compensation to a
negative (-) setting
Use AE lock or use the spot
metering function
Change the shooting angle.
Set the flash to
Guide p. 9).
Higher ISO speeds and the
ISO Auto) setting may increase
image noise. For higher image
quality, select as low an ISO speed as
possible (p. 64).
In , , ,
modes, the ISO speed increases
and noise can appear.
This is a phenomenon that occurs
with digital cameras and does not
constitute a malfunction.
(p. 116).
(p. 51).
(pp. 48, 50).
(flash off) (Basic
(High
, , , and