Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Autojack RP180
Summary of Contents for Autojack RP180
- Page 1 ROTARY POLISHER RP180 Original Instructions...
- Page 2 EXPLANATION OF SIGNAL WORD WARNING： Indicates a potentially hazardous situation,which ,if not avoided,could result in death or serious injury and/or property damage. CAUTION: Indicates a potentially hazardous situation,which,if not avoided,may result in minor or moderate injury and/or property damage. NOTICE: Indicates a potentially hazardous situation,which,if not avoided,may result in minor or moderate injury and/or property damage.
- Page 3 e)When operating a power tool outdoors,use can extension cord suitable for outdoor use.Use of a cord suitable for outdoor use reduces the risk of electric shock. f)lf operating a power tool in a damp location is unavoidable,use a residual current device (RCD)protected supply.Use of an RCD reduces the risk of electric shock.
- Page 4 g)Use the power tool,accessories and tool bits etc,in accordance with these instructions,taking into account the working conditions and the work to be performed.Use of the power tool for operations different from those intended could result in a hazardous situation. 5)Service a)Have your power tool serviced by a qualified repair person using only identical replacement parts.This will ensure that the safety of the power tool is maintained.
- Page 5 cutting accessory may contact hidden wiring or its own cord.Cutting accessory contacting a "live”wire may make exposed metal parts of the power tool “live”and shock the operator. 11.Position the cord clear of the spinning accessory.If you lose control,the cord may be cut of snagged and your hand or arm may be pulled into the spinning accessory.
- Page 6 Additional Specific Safety Instructions for Polishers • Always use eye protection .All user and bystanders must wear eye protection that conforms to Z87.1. • Clean out your tool often,especially after heavy use.Dust and grit containing metal particles often accumulate on interior surfaces and could create an electric shock hazard. •...
- Page 7 MODEL φ POLISHING FOAM mm 151/180 φ BACKING PAD mm 150/180 POWER W 1200 R.P.M. 450-1700 SPEED CONTROL • PROTECTION CLASS OPERATING VALTAGE 230V-50HZ ON/OFF SWITCH WARNING： To reduce the risk of injury,make sure the polisher is not resting on the workpiece when the switch is turned on.
- Page 8 the outlet.Also,check for blown fuses or open circuit breakers in the line. REPLACING THE POLISHING MOP Pull the used polishing mop off and apply the new one,pressing it onto the disc pad. CAUTION：Accessories must be rated for at least the speed recommended on the tool warning label .Accessories running over rated speed can fly apart and causes injury.Accessory ratings must always be above tool speed as shown on tool nameplate.Press the polishing mop to attach it to the back-up pad.
Need help?
Do you have a question about the RP180 and is the answer not in the manual?
Questions and answers