WELCOME Thank you for purchasing a SUP dolly. We hope you thoroughly enjoy this product. Please take time to read the content in this manual in order to optimise your satisfaction of this product. We believe that a Bay Sports kayak offers incomparable value.
ASSEMBLY STEP 1 Insert the axle (B) into the bottom of the frame (A). Tighten the bolts with the included Allen wrench until secure. STEP 2 Remove the pins from the axle (2a). Install the wheel (C) onto the axle and re-insert pin (2b). Repeat with the other wheel.
STEP 1 STEP 2 Place the tail end of the stand Hook the bungee strap (D) to the up paddle board in the dolly (1a). bottom frame of the dolly (2a). STEP 3 Send the bungee strap over the board (3a) and hook onto the other side of the dolly as done in Step 2 (3b).
PRODUCT WARRANTY AND LIABILITY GENERAL PRODUCT WARRANTY Products purchased from the Authorized Dealer (original place of purchase) or Merchant (“Dealer”) will be free of defects in material and workmanship at the time of receipt, and will meet the specifications stated at the place of purchase transaction or online at the Dealer’s website, under normal use and service when correctly installed, operated and maintained.
Page 9
WARRANTY LIMITATIONS The above warranty does not apply to products that are repaired, modified or altered by any party other than the Authorized Dealer; are subjected to unusual physical stress or conditions (such as overloaded ramps or corrosion), natural disaster, governmental actions, wars, strikes, labor disputes, riots, theft, vandalism, terrorism or any reason beyond reasonable control;...
Page 10
THANK YOU CONTACT US www.baysports.com.au hello@baysports.com.au 6 Woods Close, +61 (0) 474 219 619 Huntingwood NSW 2148 SHARE YOUR EXPERIENCE @BaySportsCo @BaySports_Co...