Advertisement
Quick Links
Description of GPS antenna and NTS time server connection via
SAFETY INSTRUCTIONS !
This are the important Safety Instructions that should be followed during installation and
maintenance of the ELPROMA NTS-protect overvoltage system.
IMPRTANT NOTE !
This equipment contains hazardous voltages. Do not handle any metallic part until the
power has been disconnected. Do not assemble, disassemble set when the power is ON.
Making wiring and touching cables is strongly prohibited when power is ON. Please refer
your RACK'19 safety instruction to learn more on connecting power of equipment. The
NTS-protect system requires PE line to be connected into RACK'19 din rails.
Electrical Safety:
1. Do not work alone under hazardous conditions.
2. High short circuit current trough conductive materials could cause severe burns.
3. Check that the power cord(s), plug(s), and sockets are in good conditions.
4. Use qualified service personnel to install permanently wired equipment.
5. Do not handle any metallic part before the power has been disconnected.
NTS-protect
system lightning protector system
/NTS-3000, NTS-4000, NTS-5000/
© 2008 ELPROMA Electronics
Advertisement
Need help?
Do you have a question about the NTS-3000 and is the answer not in the manual?
Questions and answers