Quick Installation Instructions - marinco INV10120700 User Manual

ENGLISH
This section provides a brief
1
overview of a basic stand alone
installation of the Inverter
However; please review the entire manual for
connection of additional features and to ensure
best performance and years of trouble-free
operation.
Use isolated tools!
Read safety instructions
(page 3)
Disconnect the electrical power:
2

Switch off all consumers,

Switch off all charging
systems.

Remove the battery fuse.

Check with a suitable
voltmeter whether the DC
installation is voltage free.
Move the main switch of the Inverter to
3
the OFF position
Mount the Inverter with four screws to a solid
4
surface. Allow at least 10 cm / 4 inch space
around the apparatus!
2
All manuals and user guides at all-guides.com

QUICK INSTALLATION INSTRUCTIONS

Connect the battery to the DC input.
5
Integrate a fuse holder in the positive
battery wire, but do not place the fuse yet.
Red wire
POS (+)
Connect

red wire to +,

black wire to –.
Incorrect polarity
will damage the
Inverter!
6 Connect the AC load to the AC socket.
120V:
For safe installation,

The chassis ground terminal (see Figure 1,
reference 7) must be connected to the central
grounding point of the vehicle/ ship

The neutral conductor (N) of the AC output of
the Inverter must be connected to the safety
ground (PE/GND) and a ground fault circuit-
interrupter (GFCI) must be integrated in the
wiring of the AC output
Refer to section NEUTRAL GROUNDING of this
user's manual
7
Check all wiring. If all wiring is
OK:

Place the inverter fuse.

Switch on the Inverter.
Black wire
NEG (–)
230V: