Electrovision B425BL Manual

E-audio bluetooth 4.0 stereo audio amplifier 2 x 15w

Table of Contents

Download this manual

B425BL

e-audio Bluetooth 4.0 Stereo

Audio Amplifier 2 x 15W

IMPORTANT

Installer and Users please note:

These instructions should be read carefully and left with the user of the product for future reference.

BEFORE USE

You must inspect the product and its power supply for any signs of damage. If the product or

power supply is damaged, DO NOT use it, and contact your supplier immediately.

Table of Contents

Do you have a question about the B425BL and is the answer not in the manual?

Page 1 B425BL e-audio Bluetooth 4.0 Stereo Audio Amplifier 2 x 15W IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. BEFORE USE You must inspect the product and its power supply for any signs of damage. If the product or...
Page 2 BOX CONTENTS PLACEMENT 2 x 3m speaker cables Locate the B425BL on a wall (using the tabs 1 x Bluetooth Power Amplifier at either end for screws, see diagram on next 1 x Power Supply page), in a cavity wall or in a ceiling.
Page 3 3. The amplifier should now be discoverable by your mobile device (you may need to scan for new devices) 4. The amplifier will show as ‘B425BL’. To sync select the device name and enter the password - 012345 PAT TESTING When used in a workplace, this product must be safety-tested yearly by a qualified electrician (PAT Tested) in order to comply with the Electricity at Work Regulations.
Page 4 SERVICE WARRANTY Electrovision guarantees the product free from defects in materials and workmanship for a period of one year. Should this unit be operated under conditions other than those recommended, at voltages other than the voltage indicated on the unit, or any attempts made to service or modify the unit , then the warranty will be rendered void.