Table of Contents
Advertisement
Operation Manual / A150-M56/66/57/67 - A155-M..
4 Commissioning / 4.1 Oil supply
01
Bearing casing
02
Oil orifice
03
Circlip
With an oil inlet pressure of more than 3 bar of overpressure (with engine under load) up-
stream of the turbocharger, an oil orifice must be installed to reduce the oil pressure.
© Copyright 2021 ABB. All rights reserved.
HZTL4032_EN
Rev.R
August 2021
Advertisement
Table of Contents
