Dab Settings - Pioneer AVH-Z7100DAB Operation Manual

Selects a service component.
Touch the following category then select each item.
[Station]: Displays all service components.
[Program Type] (PTY label): Searches from programme type information.
[Station Group] (ensemble label): Displays the ensemble list.
TIP
If you touch [List Update], you can update station list information manually.
NOTES
• Station list information is automatically updated, when you start to use this
source.
• When there is any changes in the current station group, station list information
automatically updated.
TIPS
• By pressing then touch or
• By pressing then touch and hold

DAB settings

1
Press .
2
Touch then .
The system setting screen appears.
3
Touch [AV Source Settings].
4
Touch [DAB settings].
The menu items vary according to the source.
Menu Item
[Service Follow]*1*2
[On] [Off]
[Antenna Power]
[On] [Off]
22
En
, you can also switch the preset channels.
or and releasing it, you can also perform seek tuning.
Description
Searches for another ensemble that supports
the same service component with better
reception. If no alternative service component
can be found or reception remains poor, the
unit will automatically switch to an identical FM
broadcast. (HARD LINK)
Select whether to output power to a connected
Digital Radio aerial. For details on how to
connect a Digital Radio aerial, refer to the
Installation Manual.
Menu Item
[TA Interrupt]*2
[TA OFF]
[DAB+RDS TA]
[RDS TA ONLY]
[Soft Link]*2
[On] [Off]
*1 This setting is available only when [Digital Radio] is selected as the source.
*2 Depending on the model used, this menu may not be displayed.
Description
Receives the traffic announcement from the last
selected frequency, interrupting the other
sources.
Disables this function.
Receives current traffic information for DAB and
RDS (AN-DAB1 has priority) if available.
Receives current traffic information for only RDS
if available.
When HARD LINK is unsuccessful, tunes to
another ensemble that supports the similar
service component. If no alternative service
component can be found or reception remains
poor, this function will automatically switch to a
similar FM broadcast.
NOTES
• This setting is available only when [Service Follow] is
set to [On].
• Only available in areas where SOFT LINK function is
supported.
• The broadcast content of the switched channel may
differ from the content of the original channel.