Related Manuals for Fujioh FZ-WH5038N
Summary of Contents for Fujioh FZ-WH5038N
- Page 1 Operating / Installation Manual FZ-WH5038N FZ-WH5038NR FZ-WH5038D FZ-WH5038DR Please read this manual carefully before using this appliance.
- Page 2 21 - 22...
- Page 3 Fujioh Fujioh...
- Page 5 Hand 1 x Sliding Rail Set 1 x Fujioh Heater Unit 2 x Wall Plug & Screw Set (1 spare) 1 x Hand shower c/w filter mesh washer & flow restrictor...
- Page 6 + allen key 1 x Fujioh Heater Unit 1 x Spout 1 x Hand shower c/w filter mesh washer & flow restrictor (1 spare)
- Page 7 Soap Dish...
- Page 8 Spout...
- Page 9 None Pump Model DC Pump Model 16. LVDC Board Indicator 17. DC Pump Assembly 18. RCD Test Reset Button...
- Page 10 Secure Spout to Rain shower(RS) Sliding Rail. Spout inlet (BOTTOM: from Heater outlet) Be sure do this before step 6, avoid hose colliding Extendable to the wall after spout is installed to wall. height 440mm Spout to Rail Support into Fix Plate. Tighten with allen key Open/ closed...
- Page 12 system Service Stop Valve...
-
Page 14: Plumbing Connections
PLUMBING CONNECTIONS COMPLETE THIS PROCESS BEFORE WIRING CONNECTION CONNECTION PROCEDURE: Connect the water supply to the inlet of the shower via 15mm copper, stainless steel or plastic pipe using a 15mm x 15mm elbow compression fitting. Do not use excessive force when making these connections. - Page 15 Fit the Flexible hose (Warning: Metalic / Chromed Hose shall not be used) by connecting to the unit Outlet (Left side) and hand shower. (Please, make sure to remove one washer from the end of the flexible hose connecting to the hand shower.) Filter Mesh Washer &...
- Page 16 The ‘RCD’ sign will light meaning the unit is ON. Turn the knob clockwise to sign, the ‘HEATER’ sign will light up. Turn the knob anti-clockwise to ; the ‘HEATER’ sign will switch OFF.
- Page 17 ‘HEATER’ and ‘RCD’ sign light will turn OFF.
- Page 21 None Pump Model 3.8kW, 240V AC, 50Hz 2.80 1.50 4.70 1.50 SCHEMATIC WIRING DIAGRAM (FZ-WH5038N) Thermal Cut-out Lout Nout ELECTRONIC CONTROL BOARD FLOW ON/OFF POWER SWITCH SWITCH CONTROL TRIAC SWT-EC TEST RESET To Heater TEST/RESET Chasis INDICATOR BOARD HEATING ELEMENT...
- Page 22 DC Pump Model 3.8kW, 240V AC, 50Hz 3.10 kg 1.80 kg 5.00 kg 1.80 kg SCHEMATIC WIRING DIAGRAM (FZ-WH5038D) Thermal Cut-out Lout PUMP SPEED CONTROL VR 0-100K Nout ELECTRONIC CONTROL BOARD ON/OFF POWER LVDC/ SWITCH CONTROL TRIAC SWT-EC LVDC2 PUMP RD/SW TEST RESET...
Need help?
Do you have a question about the FZ-WH5038N and is the answer not in the manual?
Questions and answers