Galaxy TP-1010 User Manual

NAIL FILING MACHINE TP-1010 is an ideal filing tool set for nail decoration. It has forward and
reverse dual direction rotations for left or right handed nail technicians, from 0 to 30000 rpm adjustable speed,
quiet & smooth operation handpiece with a flexible extension, which is convenient to use for finishing the nails.

Technical specifications:

Voltage: 220-240V AC, 50Hz
Power: 10W
Collect: 2.35mm (3/32')
Rated Speed: 0 rpm min. - 30000 rpm max.
One set including: Main Controller, Handpiece with flex cable, Handpiece Table Rest, Foot Pedal

How to Use

1. Insert the handpiece flex plug into the power output socket on the main control machine.
2. Loose the chuck by left-turning the Middle part on the hand-piece and insert/change the Bit and tighten the
chuck by right-turning the Middle part on the hand-piece
3. Plug the controller into appropriate power source.
4. Choose the mode "FORWARD" or "REVERSE" direction, and then switch to "On" position to start the
machine.
5. Select the speed level that you need by sliding the speed control handle.

Precautions:

1. Please use the correct power source voltage shown on the controller front panel.
2. Please start to use after the collet is well fixed.
3. Please stop the machine once any abnormal movement/noise is noticed at work.
4. Please adjust the speed gradually, not abruptly.
5. Please do not touch any rotating part while the machine is working.
6. When changing the direction, rotating speed has to be turned to minimum rotation. Then direction change
switch should be moved to neutral position until rotation is completely stopped. After that move direction
change switch to another direction, and set rotation speed at desired level.
7. Please do not place a cloth or anything else on the ventilation slides of the controller, and keep the dust
away from it too.
8. If the cable is broken to avoid the danger, it must be replaced by the manufacturer, service department or
other technicians.
9. This appliance is not intend for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction use of the appliance by a person responsible for their safety.
10. Children should be supervised to ensure that they do not play with the appliance. Before using, make
sure the voltage of your power supply is the same as that indicated in the instruction manual, only connect
appliance to alternating current to a correctly installed earthed socket, cord and plug must be completely
dry.
USER'S MANUAL
NAIL FILING MACHINE TP-1010