Table of Contents
Advertisement
Operation Manual / TPL67-C.. - TPL71-C..
8 Disassembly and assembly / 8.6 Dismantling and installing the tur-
bine diffuser and nozzle ring
8.6 Dismantling and installing the turbine diffuser
Releasing the turbine dif-
fuser
© Copyright 2018 . All rights reserved.
and nozzle ring
Put clamp (90921) over stud (61036) until it rests on inner radius of
u
gas outlet casing.
Pass extension (A) of torque spanner (B) through hole in clamp and
u
only loosen screws (61056) one after other.
Do not yet remove the screws (61056) and Verbus Ripp® washers
u
(61057).
HZTL2488_EN
Revision E
August 2018
Advertisement
Table of Contents
