POOL SAFE
GATE KIT
INSTALLATION
TRUST IN QUALITY:
been designed for optimum safety & ease of installation
G8SAFE SAFETY CHECKLIST
Hinges are tension adjustable and self closing
✔
Latch cannot be locked in the open position
✔
Patented self-latching mechanism, latches
✔
without any pressure
Latch cannot be prised or shaken open
✔
Tested to AS1926.1-2012
✔
Superior Quality, hinges hold 45kg
✔
Hinge safety cone to prevent climbing
✔
HINGES
1. Mark and fi x hinges to gate. Distance between top of hinges must
be minimum of 900mm (Pic. A), if this isn't possible Hinge Cone
(supplied) must be fi tted to the bottom hinge (Pic. E).
2. Align gate with hinge post and fi x hinges to post (Pic B)
3. To Adjust hinge tension, simply use supplied tool (see adjustment
diagrams).
• ONE tension click per hinge at a time
• Check for desired gate tension after each adjustment.
• Aim for equal amounts of tension clicks on each hinge.
• Maximum FOUR tension clicks per hinge.
• Once adjusted fi t the supplied covers to top of hinges (Pic C).
4. Safety cone reduces the risk of children using the hinge as a
foothold to climb over the gate. Must be fi tted to the bottom hinge
if the top of the hinges are less than 900mm apart.
Pic A
Pic A: hinges must be
spaced minimum
900mm from top to top
INCREASE TENSION
IMPORTANT
Adjust clockwise only
The Pool Safe Gate Kit has
Pic B
Pic D
ADJUSTMENT DIAGRAMS
G8SAFE
CREATING WAVES FOR POOL SAFETY
Pic C
Pic E
G8
RELEASE TENSION
SAFE
Insert tool and
push to release
.com.au