Page 2
How to Connect Step 1 When you take the receiver unit out of the box, the antennas will be folded down like this. Step 2 You will need to open them out, they twist up at the hinges. So they are straight up like this. Step 3 Plug in the power cable to the wall and into the DC Input on the back of the receiver and plug in the microphone jack into A-B (this means both microphones will work off 1 cable using only 1 input on your karaoke machine/amplifier, you can put one cable in A and one in B and use two microphone inputs on your...
Page 3
Multi-Channel Wireless If your device is multi-channel (i.e. Sonken 2000R series) you also have the option of changing the frequencies on each microphone (see battery compartment for dip switches) and on the receiver unit (see front panel for dip switches).
Need help?
Do you have a question about the Wireless Series and is the answer not in the manual?
Questions and answers