IPCGansow CT70 Rider Quick Manual

This Guide is intended for quick consultation only and does not replace the Use and Maintenance Manual.
Before using the machine, read the Use and Maintenance Manual contained in the machine packaging thoroughly and rigorously respect all the
instructions.
PREPARATION/
OPERATION
1. Fill the detergent tank.
2. Turn the ignition key to
switch the machine on.
3. Press the brush button to
activate operation of the
head and suction motor.
4. Press the suction motor
button to disable suction if
you want to prewash the
surface.
CT70 Rider Quick Guide
5. Press the "H2O" button for
at least 2 seconds to
enable detergent flow. Set
the type of detergent flow
(MANUAL or AUTOMATIC)
on the machine's software
(see the Use and
Maintenance Manual)
6. Choose the direction of
movement by moving the
direction selector
7. Turn the potentiometer to
set work speed.
8. Operate the accelerator
9. Begin working.
10. When you have finished
cleaning, proceed as
follows:
• Turn the brush motor off.
• Stop the detergent flow
• Turn the suction motor
off.
• Press the emergency
button
• If necessary, charge the
batteries.
DAILY MAINTENANCE
Empty the dirty water drum
through the drain hose.
Clean the dirty water drum.
PLDC01873