Best Buy BE-MQP10W22K Quick Setup Manual

10-Watt Wireless
Charging Pad
Quick Setup Guide
BE-MQP10W22K /
BE-MQP10W22K-C
Before using your new product, please read these instructions to prevent any damage.
Package contents
• 10 W Qi Certified Wireless Charging Pad
• 4 ft. (1.2 m) charging cable
• Quick Setup Guide
Compatibility
Any Qi-enabled devices up to 10 W, including smartphones,
headphones, and smart watches. This includes the latest iPhone,
Samsung Galaxy, and Note devices.
Features
• Compatible with Apple, Samsung, and other Qi-compatible devices
• Charges devices wirelessly with a 10 W max output
• Shows your device is positioned correctly with an LED indicator
• Keeps your charger and device in place with non-slip rubber pads
• Includes a micro USB cable to plug into your existing power
adapter or computer
• Built and backed by Best Buy
Product overview
LED indicator
LED indicator status
LED STATUS
Pulsing blue Standby
Solid blue Charging
Solid purple Quick charging
Solid red Insufficient input power
Blinking red Charging error
Using your charging pad
1 Connect the charging cable to your charging pad.
2 Plug the other end of the cable into a USB port on a computer
or into a power adapter. See "Choosing the right USB power
adapter" for power requirements.
Choosing the right USB power adapter
• A Quick Charge (QC) 2.0 or QC 3.0 charger is required to obtain
the full 10 W of wireless charging performance.
• A minimum of a 5 V/2 A (10 watts) USB charger or powered USB
port is required to obtain 5 W of wireless charging performance.
• Using low-power USB ports (with less than 5 V/2 A of power
output) could cause poor performance or cause the wireless
Micro USB port
charger to not work.
3 Place your Qi-enabled device on the center of your charging
pad with the screen facing up. The LED is blue/purple when
your device is charging.
Note: If the LED is red, your device is not charging.
See "TROUBLESHOOTING" for more information
Charging cable
USB power adapter
.