DTV Recorder / PVR / VCR
TV
RG6Q Fly Lead
RG6Q Fly Lead
Out
ANT
DTV Recorder / PVR / VCR
●
To maintain optimum antenna signal quality, use an "F"
type TV signal splitter (as illustrated) when connecting
two or more devices to the same antenna socket.
Set top box
TV
HDMI cable
AV / Game equipment
■
Using HDMI terminal
TV
HDMI cable
●
You can also make similar connection via HDMI 2.
■
Using COMPONENT terminals
TV
Audio cable
■
Using COMPOSITE terminals
TV
Audio cable
8
"F" type Antenna Splitter
RG6Q Fly Lead
In
Antenna Socket
Wall Plate
Satellite dish
Set top box
Equipment
Equipment
Component
video cable
Equipment
Video cable
Speaker system
TV
HDMI cable
●
Use HDMI 2 for connecting an amplifier that has ARC
(Audio Return Channel) function.
For an amplifier without ARC function, use DIGITAL
AUDIO OUT.
●
To enjoy the sound from the external equipment in
multi-channel sound (e.g. Dolby Digital 5.1ch), connect
the equipment to the amplifier. For the connections,
read the manuals of the equipment and amplifier.
Initial Setup
When you first turn on the TV, a series of steps will pop-
up to guide you to setup your TV.
●
These steps are not necessary if the setup has been
completed by your local dealer.
1
Plug the mains plug into the socket
outlet and turn on the TV.
It may take a few seconds before the screen is
displayed.
Proceed to steps 2, 3 and 4.
Scanning starts automatically when
you turn on the TV (step 3). After scanning is
completed, proceed to step 4.
2
Select your area.
Select State/Territory
New South Wales/Australian Capital Territory
Victoria
Queensland
South Australia
Western Australia
Northern Territory
Tasmania
Select
OK
Access
Amplifier with
speaker system
AC
220 - 240 V,
50/60 Hz