Florida Probe Voice Works Quick Start

Headband
Volume Down
Volume Up
Ear Cup
QuickStart
1
Connect the charging stand base to the
power adapter and the power adapter
to an electrical outlet.
2
Connect the charging stand base to the
computer where the VoiceWorks software
is installed using the supplied USB cable.
3
Insert the FP32 Software Key into a USB
port on the same computer.
NOTE: Both the USB cable and the power
adapter must be plugged into the charging
stand base in order for the headset to work
wirelessly when you remove it from the charging
stand base to record a periodontal chart. Once
the headset is removed from the charging stand
base, the Battery Status
the Headset Pairing Status
and will tell show you the pairing status of the
headset: (1) paired, (2) trying to pair or (3) not paired.
4
Dock the headset onto the charging stand base when not in use in order to keep
headset charged. Headset power should last about 12 hours on a full charge.
**IMPORTANT**
For successful charging and pairing, the headset must be placed
on the charging stand base using the
The Battery Status
however, Battery Status
charging stand base. Headset will not work if it is not paired to charging stand base
(see back of this sheet for more info on how to make sure headset is successfully paired with base)
WIRELESS HEADSET REFERENCE
**Space between the Ear Cup
(make sure headset is properly
placed in charging stand base for
successful charging and pairing
Microphone
Mute LED
Mute button
Light will not be lit, but
Light will function
**Space between the Ear Cup and Headband.**
Light will be lit when headset is connected properly for charging;
Light does NOT indicate whether or not headset is paired with
1-877-357-7623
and Headband**
using this space)
(make sure it is positioned by mouth)
(lit when microphone is muted)
(Say,"VoiceWorksOFF" instead)
Battery Status
(lit when headset is properly seated
in charging stand base for charging)
Headset Pairing Status
(see back of this sheet for more info)
FloridaProbe.com
Light
Light
.