Page 1
1. Remove the unit and other parts from the box and check against the packing list. 2. Use the attached mounting instructions to cut the correct hole in the countertop. 2. Set the DownDraft Pro in place. 3. Align holes with threaded studs and hold the worktop sub-assembly up while threading the 10-32 nuts on the studs.
Page 2
DOWNDRAFT PRO 96061 DIMENSIONS - STANDARD DIMENSIONS - EXTENDED REVISIONS ZONE REV. APPROVED DESCRIPTION DATE 14.00 24.000 1.000 21.640 DIMENSIONS ARE IN INCHES NAME DATE VANIMAN MANUFACTURING CO. 25799 Jefferson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626) www.vaniman.com TOLERANCES: DRAWN 12/21/2017 ...