Siemens WM14N122 User Manual And Assembly Instructions page 48

en Troubleshooting
Fault
The programme does not
start.
The door cannot be opened.
The water is not draining.
48
Cause
Childproof lock is activated.
Fertig in is activated.
Laundry is caught in the
door.
– –– is activated.
The temperature is too high.
Water level is too high.
Power failure.
Drain pipe or water outlet
hose is blocked.
Drain pipe or water drain
hose is caught or jammed.
Drain pump is blocked.
– –– is activated.
troubleshooting
→ "Deactivating the childproof
▶
lock", Page 37
Check whether Fertig in is activ-
▶
ated.
→ "Buttons", Page 23
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start / Nachlegen to start
4.
the programme.
Continue the programme by select-
▶
ing Schleudern or Abpumpen and
pressing Start / Nachlegen.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 36
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 36
Start the Abpumpen programme.
▶
Open the door using the emergency
▶
release.
→ "Emergency release", Page 54
Clean the drain pipe and the water
▶
outlet hose.
Ensure that the drain pipe and wa-
▶
ter drain hose are not kinked or
trapped.
→ "Cleaning the drain pump",
▶
Page 41
Continue the programme by select-
▶
ing Schleudern or Abpumpen and
pressing Start / Nachlegen.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 36