Advertisement
Quick Links
Product Specification
Product dimensions
Product weights
Radio frequency
Operation frequency
2.4GHz
5GHz
Bluetooth low energy(V4.1)
Networking interface
Antenna Gain
Max power consumption
Max Tx Power
Wireless AP
NWA1000
245mm x 245mm x 50mm
(exclude universal mounting kit)
1.75kg
One Wi-Fi 2.4GHz
One Wi-Fi 5GHz
One Wi-Fi 2.4/5GHz(scanning)
One Bluetooth 2.4GHz
2.4G : 2412 ~ 2462MHz
5G Band 1 : 5180 ~ 5240MHz
5G Band 4 : 5745 ~ 5825MHz
BT : 2402 ~ 2480MHz
Two 5G mGig Ethernet ports
Wi-Fi 2.4GHz band : 4.6 dBi (Omni)
Wi-Fi 5GHz band: 5 dBi (Omni)
Dual band Wi-Fi(2.4/5GHz): 4.6/5dBi
(Omni)
BLE: 4.4dBi (Omni)
FCC:
Wi-Fi 2.4GHz band: 627.338mW
Wi-Fi 5GHz band:
5180-5240 MHz: 477.372 mW
5745-5825 MHz: 585.520 mW
BLE: 6.637 mW
IC:
Wi-Fi 2.4GHz band: 627.338mW
Wi-Fi 5GHz band:
5180-5240 MHz: 57.687 mW
5745-5825 MHz: 585.520 mW
BLE: 6.637 mW
35watts
Advertisement
Summary of Contents for Nile NWA1000
- Page 1 Wireless AP NWA1000 Product Specification Product dimensions 245mm x 245mm x 50mm (exclude universal mounting kit) Product weights 1.75kg Radio frequency One Wi-Fi 2.4GHz One Wi-Fi 5GHz One Wi-Fi 2.4/5GHz(scanning) One Bluetooth 2.4GHz Operation frequency 2.4G : 2412 ~ 2462MHz 2.4GHz...
- Page 2 Power source DC power: 12V/3.5A power adapter Power over Ethernet(PoE): 802.3bt Mounting mode Ceiling, Operation temperature 0 ~ 45 C Operation humidity 5 – 95% Noncondensing Altitude 10,000ft (3,048m)
- Page 3 Installation Guide Installation of ceiling plate + AP on T-bar (9/16” & 15/16”)
- Page 4 Uninstallation of ceiling plate + AP from T-bar (9/16” & 15/16”)
- Page 5 Installation of RJ45 cable on ceiling plate...
- Page 6 Installation of ceiling plate + AP on wall mount...
-
Page 7: Regulatory Compliance Information
. Please use CSA/UL Certification Approval & LPS’s External Power Adaptor. . Please connect with CSA/UL Certification Approval & LPS’s DC Source. . NWA1000 is indoor use Wireless AP. . There is a risk of fire if the battery is replaced with an incorrect type. -
Page 8: Industry Canada Statement
FCC Requirement for Operation in the United States of America: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 9 exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;...