Fujitsu FI-60F Getting Started page 12

5. Install the application following the instructions
on the window.
6. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish]
To finish the installation, it may be
ATTENTION necessary to restart your computer.
Follow the instructions on the window.
For FUJITSU ISIS Scanner Driver
■ Preparation
Confirm the following items before installing the driver
application.
• Remove the Setup CD-ROM from its package,
but do not insert the Setup CD-ROM into the CD
driver yet.
■ Installing the FUJITSU ISIS Scanner
Driver
Windows XP screenshots are used in
this section as examples. The windows
HINT
and operations may vary slightly
depending on your OS.
1. Turn your PC on and log on to Windows.
When using Windows 2000 or Win-
ATTENTION dows XP, log on as a user with
"Administrator" privileges (privileges of
the administrator of your PC).
4
2. Insert the "Setup CD-ROM" into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
This screen may not appear when the
ATTENTION "Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this
CD-ROM directly from the "Explorer"
or "My Computer".
3. Click [INSTALL PRODUCTS].
4. Click [ISIS Driver] on the window below.
5. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
6. Follow the instructions on the window to install
the application.
7. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish].