Commercial water heaters & commercial / common flue components (8 pages)
Summary of Contents for Rinnai DD1
Page 1
& Commercial / Common Flue Components This appliance shall be installed in accordance with: • Rinnai Commercial Common Flue System, Operating and Installation Manual (supplied separately) • Manufacturer’s Installation Instructions • Current AS/NZS 3000, AS/NZS 3500 & AS/NZS 5601 • Local Regulations and Municipal Building Codes including local OH&S requirements This appliance must be installed, maintained and removed by an Authorised Person.
Page 2
Installation, Service and Removal MUST BE by an Authorised Person only. BEFORE ASSEMBLY Review and understand the content of the “Rinnai Commercial Common Flue System, Operating and Installation Manual” as it contains important information to ensure safe and reliable operation of the appliance and flue system.
Page 3
CONDENSATE DRAIN ASSEMBLY Step 1. Rinnai supplies a condensate tube E. that is pre-installed under the lower left front of the adaptor box C. Step 2. Installer is to provide, install and fix condensate drain components G. and H. to the condensate tube E.
Page 4
Fax: (03) 9271 6622 Tel: 1800 000 340 Rinnai has a Service and Spare Parts network with personnel who are fully trained and equipped to give the best service on your Rinnai appliance. If your appliance requires service, please call our National Help Line. Rinnai recommends that this appliance be serviced every 3 years.
Need help?
Do you have a question about the DD1 and is the answer not in the manual?
Questions and answers