Advertisement
2.2
Permanent Use (Pre-Assigned Mode)
•
2154 / 2155 allows Administrator to assign specific User Card to locker
•
2254 / 2255 allows User to select their own personal 4-digit passcode
•
Control Card sets passcode back to default 1-2-3-4. Can also assign new User Card or delete old User
Card from lock
•
Manager Card gives User supervisory access without removing existing 4-digit passcode or assigned User
Card.
2.3
Custom Programming
•
The 2154 / 2254 & 2254 / 2255 RFID locks have many custom programming features such as time-based
operation, zone-based Control Cards, and audit trail.
3.
Basic Operation of the Locks
3.1
Permanent Use Mode
•
Open & Close by 4-Digit Passcode: (2254 / 2255 only)
1.
Default Passcode: 1-2-3-4
2.
Press "ZEPHYR" button plus 4-digit passcode then "ZEPHYR" button again
3.
Close – Lock bolt automatically re-engages after several seconds.
•
To change Passcode:
1.
Press "ZEPHYR" button plus old passcode,
2.
Press "ZEPHYR" button again plus new passcode
3.
Repeat: press "ZEPHYR" button plus new passcode then "ZEPHYR" button again
o
Note: Passcode can be changed only when the lock is unlocked
•
Open & Close using the RF Card Key (2154 / 2155 & 2254 / 2255)
•
For the 2154 / 2155
o
Press "ZEPHYR" Button and touch the User Card to the lock face.
•
For the 2254 / 2255:
1.
The RF Card Key can be used instead of the keypad if desired:
2.
Press "ZEPHYR" Button and touch the User Card to the lock face.
3.2
Day use Mode
•
Open & Close by Passcode: (2154 / 2155 & 2254 / 2255)
1.
To Close: Press "ZEPHYR" button plus self-selected 4-digit passcode then "ZEPHYR" button
again
2.
To Open: Press ZEPHYR" button plus the same 4-digit passcode then "ZEPHYR" button again;
The bolt stays open, and the previous passcode is erased.
•
Open & Close by RF Card Key: (2154 / 2155)
1.
To Close: Press "ZEPHYR" button and touch the User Card to the lock face.
2.
To Open: Press ZEPHYR" button plus the same 4-digit passcode then "ZEPHYR" button again;
The bolt stays open, and the previous passcode is erased
Note: After it is unlocked, any 4-digit password can be used to lock it. The User Passcode will be deleted each time
4.
the lock is opened.
zephyrlock.com
a.
When the user selects to operate by the RF Card Key (2254 / 2255), the default
passcode 1-2-3-4 will be erased from the lock; However, the User passcode and the
default passcode will not be deleted.
b.
When the user wants to set a new passcode (2254 / 2255), the process is the same
as in "Change Passcode" while the lock is in the unlocked position. The default
passcode 1-2-3-4 cannot be used as a user passcode.
c.
When the Control Card is used, the User passcode will be set back to the default
passcode: 1-2-3-4
866-937-4971
info@zephyrlock.com
Advertisement
