Operation Manual / TPL65VA32 / VA33
8 Disassembly and assembly / 8.9 Installing cartridge group
© Copyright 2020 . All rights reserved.
Measure and note the axial clearance (A) (see the section on axial
u
clearance).
CAUTION
Clearances out of tolerance
Clearances out of tolerance and excessively worn components can be
the cause of serious damage to machinery and property.
Have components assessed and, if necessary, replaced by an ABB
u
Turbocharging Service Station.
Connect oil lines and all air lines in accordance with engine builder's
u
instructions.
Version with compressor wheel cooling system
Fit the air supply line. (Also see the chapter Preliminary remarks / Lay-
u
out and functioning.)
Fit the filter silencer or air suction branch.
u
Fit the insulation.
u
HZTL2464_EN
Rev.E
March 2020