Advertisement
Quick Links
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure all parts are included before you begin assembly of this item.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
Parts List and Hardware List
ID
PICTURE & DESCRIPTION
a
b
c
1
2
3
4
5
Q.tys
ID
PICTURE & DESCRIPTION
6
32X
7
32X
1X
8
6X
9
6X
4X
1X
1X
O U T D O O R
Product dimension:
Bench: 53W x 27D x 28.5H (Inches)
Chair: 25W x 27D x 28.5H (Inches)
Table: 41.5W x 21.3D x 14.2H (Inches)
ASSEMBLY INSTRUCTIONS FOR SAFAVIEH
Q.tys
THE DESIGN OF LARDNER LIVING IN THE DRAWINGS MAY VARY
FROM ACTUAL, BUT ASSEMBLY CAN BE APPLIED
4X
4X
1X
2X
Weight Capacity: 704 lbs per bench & 55 lbs per table
WARNING: DO NOT STAND ON BENCH & TABLE
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
PAT6757
Item#
LARDNER LIVING
FOR THIS ITEM
1
Advertisement
Related Manuals for Safavieh Outdoor PAT6757
Summary of Contents for Safavieh Outdoor PAT6757
- Page 1 Spot clean using a mild water-free solvent. Only a professional cleaner should O U T D O O R undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining. PAT6757 Item# NOTICE Product dimension: * Please make sure all parts are included before you begin assembly of this item.
- Page 2 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tools Required for Assembly: Allen Key (included) Tighten 70% Tighten 100%...
- Page 3 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tighten 70% Tighten 100% Step 1: Attach wood leg (1 &...
- Page 4 Step 2: Fully tighten using Key (c) after that put Step 1: Attach wood leg (3) to frame, using a & b. Loosen the bolt to balance the table first the glass on top table Step 3: Put all cushions on the chairs and bench...