Table of Contents
Advertisement
1 Getting Started
1.1 Getting to know your touch phone
1.2 Installing the SIM card, battery, and storage card
You need to remove the back cover before you can install the SIM card and
battery. Also, make sure to always turn off the power before installing or
replacing the SIM card and battery.
To remove the back cover
1. Make sure your device is turned off.
2. Firmly hold the device with both hands and the front panel facing down.
3. Push the back cover up with your thumbs until it disengages from the device
and then slide it up to remove.
To remove the battery
1. Make sure your device is turned off.
2. Remove the back cover.
3. The bottom of the phone has a notch. Lift the battery by the notch to remove
it.
To install the SIM card
The SIM card contains your phone number, service details, and phonebook/
message memory. Your device is supported 2G, 3G (WCDMA) or 4G
(FDD_LTE) SIM cards.
1. Remove the battery if it is installed.
2. Locate the SIM card slot, and then insert the SIM card with its gold contacts
facing down and its cut-off corner facing out the card slot.
3. Slide the SIM card completely into the slot.
Note: • The phone can be supported the double SIM cards. The card slot
will be supported 3G (WCDMA) or 4G SIM card (FDD_LTE), but one SIM
card can use 4G networks only.
If you need to use 4G operation, please insert 4G card in the card slot
(network type is default 4G, defined in the menu Settings/More/Cellular
networks/Preferred network type), If insert 3G or 2G card in the card slot,
you can also use 3G or 2G operation only.
5
Advertisement
Table of Contents
