HMDX CRAZE BUDS HX-EP250 Quick Start Manual

©2014 HMDX. All Rights Reserved.
IB-HXEP250

CRAZE BUDS QUICK START GUIDE

POSITION BEHIND NECK
1. Snap ear hooks into place
2. Position cord behind your neck
3. If the cord length is not comfortable, use the cable clip to adjust it.
4. Secure ear hook behind your ear
5. Place earbud in ear
6. Repeat for both earbuds
7. Press and hold the
8. Follow instructions on your device to pair the unit
9. Pair your device with the earbuds by selecting HMDX Craze from
the Bluetooth listings on your device or selecting YES
10. Press play on your device and use the controls on the unit to
adjust desired volume
HEY. HAVE WE SEEN YOU HERE BEFORE?
Register your earbuds at www.hmdxaudio.com. Information about where you
bought them and how you're using them is like gold for the people who make
these earbuds. Do them a solid, will ya?
Por manual de instrucciones e información de garantía en español visítenos
en www.hmdxaudio.com.
There are lots of cool HMDX speakers. Check them all out at
www.hmdxaudio.com.
Setup is pretty easy, but we put a manual together just in case you need it. It's full
of information and sarcasm—just like that English teacher you had that crazy
semester.

PACKAGE CONTENTS

User Manual Earbuds

JUST CHARGE IT

Charging the earbuds is so easy you've probably figured it
out by now, but just in case, you've got two options: you
can charge them using your computer or a wall outlet.
1. The cord that came with the earbuds —the
one with the USB on one end and the
Micro USB on the other—will work with
your computer.
2. If you want to use the wall outlet, you'll
need to pick up a power cord with a Micro
USB the next time you're at the store, or
use any USB AC adapter, including the one
for your cell.
Plug them in and your earbuds will be ready for an epic night in no time. You
should go get ready, too! They need about 3 hours for 6 hours of party time.
CONTROL YOUR DESTINY...
OR AT LEAST YOUR EARBUDS
1. This is the power button, press and hold for
2–3 seconds to power on.
2. Turn the music up. (Press and hold for 2
seconds to skip to the next track.)
3. Push it to play, push it again to pause.
4. Turn the music down. (Press and hold for 2
seconds to move to the previous track.)
5. This light lets you know when your device is
charging and when Bluetooth is connected.
6. The power cord goes here.
7. Cable clip to adjust strap. To shorten, pull the
cable through the clip to the desired length.
®
BLUETOOTH CONNECTION: IT'S A SETUP
Like any amazing couple, this one starts with a connection—one between your
device and the earbud's Bluetooth.
Here's how it works:
1. We know you're probably going to think, "derp" with this one, but we have to
say it: Make sure the smartphone, tablet or computer you want to hook up to
the earbuds has Bluetooth. (There. We got that out of the way.)
2. Turn on the earbuds and look for the little blinking light.
3. Do whatever your device needs you to do on its end. (We don't know what
you're using. We're not spies.)
4. Look for HMDX Craze in your device's Bluetooth list or click YES—whatever
pops up on your device—and BAM you're connected.
5. Now hit PLAY on your earbuds and crank it up—or down if you're lame.
You're probably only going to have to do this once, unless your device goes
through a major I-just-dropped-it-in-the-pool kind of reboot. The device and
Bluetooth will find each other every time just as long as the earbuds are set to
Bluetooth and your device's Bluetooth is, you know—on.
If you're connecting to a computer, you may have some extra steps on that end.
You'll have to get that information from the computer company.
Depending on your device you may be prompted to enter a pairing code.
If prompted enter "0000" as the code.
If you are having trouble pairing, you can manually enter paring mode. Just press
and hold the power button for 5 seconds when the Craze Earbuds are powered
off.
Note: If you turn on your Craze Earbuds but haven't started the party, they will
automatically power off after 2 minutes of unpaired inactivity.
USER GUIDE AND
WARRANTY INFORMATION
PAIR YOUR DEVICE
button for 3 seconds
Charging Cord Ear Hooks Ear Tips Cable Clip
6
HX-EP250
ROCK WITHOUT WIRES
5
2
3
1
4
7