Basic Operations - Prima LE-43PC88 Instruction Manual

Turning the IFP on or off
1
Plug the power cord into an AC Power outlet. Press Power Switch on the IFP.
2
Now the IFP is in standby mode. Wait a moment until the power indicator lights up, then press POWER
on the IFP. (Be sure to wait for a few seconds before pressing POWER button. If you promptly press POWER
button then the IFP may not respond or act wrongly.)
3
Press button again to turn off the IFP and put the IFP in standby mode.
To cut off the power completely, press Power Switch on the IFP.
Note: If the IFP does not receive a displaying signal for a certain time, the IFP goes into standby mode.
Operating the Float menu
Switch to the Home page.(Android Interface)
Volume down
Switch to different input source,
i.e. HDMI, VGA, etc.

Basic Operations

1
Touch the bottom of the screen and drag upward to make
Press and drag to any place of the screen.
Touch once to control the MENU appear.
2
When displaying at USB, DVD interface, touch once at the lower part of the screen,
the display control menu will appear.
Switch to the display menu screen
Exit to the current system
or return to previous.
Volume up
Touch once to control the MENU disappear.
10
to turn
appear.