Canon CHDK User Manual page 29

Enable Symbols
To display Menu Symbols
User Menu
< OSD parameters < Main Menu
Add frequently used menu items to make a custom easy
access menu.
User Menu Enable
[ Off, On, On Direct, Edit ]
• Off - Disables use of the User Menu
• On - Enables the User Menu when in
• On Direct - When entering
without having to press the
top or using a [HALF-PRESS]
• Edit - Enters the editing mode for the User Menu.
To copy other menu-items to build your custom User Menu (Up to 10 entries)...
Still in OSD parameters, select
select the item you want to add to the User Menu, then press the Exposure /Erase
or the equivalent button on your camera. The item has now been added to your User Menu. Each
new item is added as the lowest on the menu. To delete an item, in Edit mode, select the item
and press button (or equivalent). When editing is complete remember to set the User Menu
Enable option back from "Edit" to either "On" or "On Direct".
Customizing hint / reminder: Some CHDK features require 2 or more options that work
together. An example, "Override Shutter Speed" might also need its associated "Value Factor"
selection and the "Shutter Speed Enum Type" if you frequently change that too. Be sure to
copy any related menu items together so they are still available where you need them in your
custom menu.
Enable [•] / Disable [ ]
With Symbols
< OSD parameters < Main Menu
<ALT>
mode your User Menu will be automatically displayed
<ALT>
button. You can reach the main menu by scrolling to the
MENU
shortcut keys.
+ MENU
User Menu Enable [ Edit]
Without Symbols
mode and pressing [HALF-PRESS]
, now browse to any menu and
27
+ MENU.
button