Wellis Coyote BBQ Instruction Manual page 22

Step 7
EN
1. Check the edge of the middle plate of the drawer assembly (Part
#52) and make sure the side with edge is facing up; otherwise you
will get to wrong folding direction (see the picture below with wrong
folding direction with "×"). Be careful with the folding process.
2. Use 8 pcs 5/32 flat Philip's screw heads (Part # 70) install the
bottom plate of drawer assembly (Part# 52.4) to the middle plate
(Part# 52.3)
3. Use 8 pcs 5/32 flat Philip's screw heads (Part # 70) install the front
plate of drawer (Part# assembly to the middle plate (Part# 52.1 and
52.2)
Two Holes on the
Corner: Front