JMTek WPC900 Instruction Manual

Fast Wireless Charger Instruction Manual
Please read the following carefully before using the device to ensure
safe and proper use.
Package Content
. Wireless Charger
. USB A to USB-C fast charging cable
. User Manual
Specifications i
. Input: DC 5V,2A/ DC 9V,2A
. Output: 5W/7.5W/10W/15W
. Charging Distance≤6mm
General information
160*90mm 70g 书写纸 单面印刷 对折一次
160mm
. This charger works with all Qi-compatible devices (please make sure your
device is Qi-compatible)
. For normal operation, no weaker than DC 5V, 2A adapter is required.
. For fast wireless charging mode, use the QC 2.0/QC 3.0 or PD adapter and
compatible smartphones.
. This wireless charger can charge smartphones with non-metal protective
case or silicone covers that are no thicker than 6mm.
Instructions
Connect the USB cable(included) to a power outlet rated at DC 5V/2A or
9V/2A, the Type-C plug to the Type-C input of the wireless charger.
Place your Qi compatible phone with inductive (wireless) charge feature onto
the charger (back of phone to charger), then wireless charging of the phone
will start immediately.
Note- only devices which support Qi wireless charge technology can be
wirelessly charged from this charger, please check your device specifications.
some phone cases do not support Wireless Charging due to the thickness and
design. If your phone is compatible with Wireless Charging and you are unable
to charge it wirelessly, please remove your phone case and retry.
Caution: Do not drop, disassemble or modify this product. Do not expose this
product to fire or excessive heat. Do not expose this product to water or
excessive humidity. Do not put any bare metal on the surface area of the wireless
charger when it is operating.
WPC900-SMS-JMT001
WPC900
70431-0167-01
说明书折法（图非1:1）
Wireless Charger Instruction Manual
Please read the following carefully before using the device to ensure
safe and proper use.
Package Content
. Wireless Charger
. USB A to USB-C fast charging cable
. User Manual
Specifications i
. Input: DC 5V,2A/ DC 9V,2A
. Output: 5W/7.5W/10W/15W
. Charging Distance≤6mm
General information
Wireless Charger Instruction Manual
Please read the following carefully before using the device to ensure
safe and proper use.
Package Content
. Wireless Charger
. USB A to USB-C fast charging cable
. User Manual
Specifications i
. Input: DC 5V,2A/ DC 9V,2A
. Output: 5W/7.5W/10W/15W
. Charging Distance≤6mm
General information
说明书折后尺寸：80*90mm
201216 Steven
. This charger works with all Qi-compatible devices (please make sure your
device is Qi-compatible)
. For normal operation, no weaker than DC 5V, 2A adapter is required.
. For fast wireless charging mode, use the QC 2.0/QC 3.0 or PD adapter and
compatible smartphones.
. This wireless charger can charge smartphones with non-metal protective
case or silicone covers that are no thicker than 6mm.
Instructions
Connect the USB cable(included) to a power outlet rated at DC 5V/2A or
9V/2A, the Type-C plug to the Type-C input of the wireless charger.
Place your Qi compatible phone with inductive (wireless) charge feature onto
the charger (back of phone to charger), then wireless charging of the phone
will start immediately.
Note- only devices which support Qi wireless charge technology can be
wirelessly charged from this charger, please check your device specifications.
some phone cases do not support Wireless Charging due to the thickness and
design. If your phone is compatible with Wireless Charging and you are unable
to charge it wirelessly, please remove your phone case and retry.
Caution: Do not drop, disassemble or modify this product. Do not expose this
product to fire or excessive heat. Do not expose this product to water or
excessive humidity. Do not put any bare metal on the surface area of the wireless
charger when it is operating.
. This charger works with all Qi-compatible devices (please make sure your
device is Qi-compatible)
. For normal operation, no weaker than DC 5V, 2A adapter is required.
. For fast wireless charging mode, use the QC 2.0/QC 3.0 or PD adapter and
compatible smartphones.
. This wireless charger can charge smartphones with non-metal protective
case or silicone covers that are no thicker than 6mm.
Instructions
Connect the USB cable(included) to a power outlet rated at DC 5V/2A or
9V/2A, the Type-C plug to the Type-C input of the wireless charger.
Place your Qi compatible phone with inductive (wireless) charge feature onto
the charger (back of phone to charger), then wireless charging of the phone
will start immediately.
Note- only devices which support Qi wireless charge technology can be
wirelessly charged from this charger, please check your device specifications.
some phone cases do not support Wireless Charging due to the thickness and
design. If your phone is compatible with Wireless Charging and you are unable
to charge it wirelessly, please remove your phone case and retry.
Caution: Do not drop, disassemble or modify this product. Do not expose this
product to fire or excessive heat. Do not expose this product to water or
excessive humidity. Do not put any bare metal on the surface area of the wireless
charger when it is operating.