Configuring Wlan Access; Access Via Umts; Ethernet And Lan - Fujitsu Lifebook S761 Operating Manual

Working with the notebook
Configuring WLAN access
• Requirement: WLAN is available and you have the necessary access data to hand.
Information on configuring WLAN access can be found in the
documenation for your operating system.

Access via UMTS

If you ordered an integrated UMTS module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional UMTS module is ready for use straight away.
If you did not order a UMTS module, you can purchase the accessories required to receive
UMTS signals from your Fujitsu Technology Solutions dealer or other specialist dealer.
You will find information on establishing the connection with the UMTS network in
the documentation for the hardware you plan to use.
Your device can connect with the Internet via UMTS. To do this, use one of
the following types of connection:
• Integrated UMTS module (availability dependent on model variant)
• USB dongle (a USB stick containing a SIM card from your mobile phone provider)
• UMTS ExpressCard (fits into the ExpressCard slot on your device)
• A mobile end-device (e.g. mobile phone with Bluetooth or cable connection)

Ethernet and LAN

EthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
1
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
48
► Connect the network cable to the LAN
port of the notebook (1).
► Connect the network cable to your
network connection (2).
2
Fujitsu Technology Solutions