Ieee 1394 Port; Headphone Jack; Microphone Jack; External Monitor Port - Fujitsu Lifebook S6210 User Manual

L i f e B o o k S 6 0 0 0 N o t e b o o k
Figure 4-15. Connecting a USB Device

IEEE 1394 PORT

The 4-pin 1394 port allows you to connect digital
devices that are compliant with IEEE 1394 standard. The
IEEE 1394 standard is easy to use, connect, and discon-
nect. This port can allow up to 400 Mbps transfer rate. A
third-party application is required to operate your
digital device with the 1394 port
The 1394 port used in this system uses a
four-pin configuration. If you intend to
interface with devices which use a six-pin
configuration, you will need to purchase
an adapter.
In order to connect a 1394 device, follow these steps:
1. Align the connector with the port opening.
2. Push the connector into the port until it is
seated.(Figure 4-16)
Figure 4-16. Connecting an IEEE 1394 Device

HEADPHONE JACK

The headphone jack (Figure 4-17) allows you to connect
headphones or powered external speakers to your note-
book. Your headphones or speakers must be equipped
with a 1/8" (3.5 mm) stereo mini-plug. In order to
connect headphones or speakers follow these steps:
1. Align the connector with the port opening.
46
.
2. Push the connector into the port until it is seated
If you plug headphones into the
headphone jack, you will disable the built-
in stereo speakers.
Figure 4-17. Connecting Headphones
If you plug headphones into the head-
phone jack, the built-in stereo speakers
will be disabled.

MICROPHONE JACK

The microphone jack allows you to connect an external
mono microphone. Your microphone must be equipped
with a 1/8"(3.5 mm) mono mini-plug in order to fit into
the microphone jack of your notebook. In order to
connect a microphone follow these easy steps:
(Figure 4-18)
1. Align the connector with the port opening.
2. Push the connector into the port until it is
seated.
Figure 4-18. Connecting a Microphone

EXTERNAL MONITOR PORT

The external monitor port allows you to connect an
external monitor. In order to connect an external monitor
follow these easy steps: (Figure 4-19)
1. Open the flexible cover over the external monitor
port.
2. Align the connector with the port opening.
3. Push the connector into the port until it is seated.
.